Grundfos 55724 AQUASTAT KIT WITH 3/4" CLIP-ON MOUNT FOR 7/8" O.D..

AQUASTAT KIT WITH 3/4" CLIP-ON MOUNT FOR 7/8" O.D.

AQUASTAT KIT WITH 3/4" CLIP-ON MOUNT FOR 7/8" O.D. Plastic case, 2-wire connections, and mounting bracket The AQUASTAT system provides fully automatic operation of a pumping application using the pump's float switch as the switching element. Mounting the AQUASTAT sensor floats directly on top of the cooling circuit without having to drill any additional holes in the tank wall or plumbing.

The AQUASTAT 55724 is a kit used to connect a temperature sensor or controller to an oil filled pump. This kit includes the following items: 1 – Standard Temperature Sensor, 1 – 3/4" Clip-on Mount for 7/8" O.D. Pump, 2 – 1/2" X 9 1/4" Hoses, and instructions.

AQUASTAT KIT, P/N: 55724, 7/8" O.D. CLIP-ON MOUNT FOR AQUASTAT, 4140Series Pump

The AQUASTAT KIT with 3/4" CLIP-ON MOUNT is a compact, battery-powered water circulation pump that can be used for circulating chilled water around HVAC systems, or for pumping out sump and sumps. It is designed to operate with open cooling water systems where the return pipe must be connected to the top of the pump. The built in thermostat can be set to provide a circulation flow at a pre-set temperature between 10 and 90ºF.

The Grundfos Aquastat 55724 kit is a reliable temperature controller with an IP 68 rating and 63 degree C maximum operating temperature. The Aquastat 55724 kit offers a manual reset (MR) function to allow the technician to manually reset the shutdown valve, should it fail to operate under automatic control. This complete assembly also comes with a 7/8" O.D. mounting clip for installation on 7/8" I.P.S.-pipe or electrical conduit.

The AQUASTAT kit controls up to two heating circuits, with 2 thermostats on one control panel. The AQUASTAT Kit is ideal for applications with multiple zones that require circulation of temperature-controlled liquids from a single heat source. The AQUASTAT Kit uses the Grundfos AQUAplus 7/8" X 9 1/4" model pump, which can circulate liquids with maximum viscosity of 750 centipoise. The maximum flow rate is 3500 liters per hour and it has an operating pressure of 16 bar (230 psi). It should be used in a water

Meet the AQUASTAT 7/8" Control. This state-of-the-art controller has been developed with the aim of optimizing the operation of medium and large pumps in heating systems.