BURNHAM 269170 MANUAL RESET BLOCKED VENT SWITCH W/BRACKET, (200 DEGREE SWITCH).

MANUAL RESET BLOCKED VENT SWITCH W/

BURNHAM 269170 MANUAL RESET BLOCKED VENT SWITCH W/BRACKET, (200 DEGREE SWITCH).

The Burnham 269170 Manual Reset Blocked Vent Switch w/Bracket, 200 Degree, is used to prevent backdrafting. It is a non-resetable type and is suitable for use with a wide variety of gas fuels including natural gas, propane and butane. It features an adjustable spring tension, allowing the switch point to be set as low as 10 PSI and up to 200 PSI. The manual reset blocked vent switch with bracket comes complete with a flame arrestor screen

Burnham 269170 Manual Reset Blocked Vent Switch with Bracket, (200 Degree Sw ** ), Not required for use in applications with a BURNHAM VR2 Smoke Boiler or VR3 Smoke Boiler or VR3A Water Boiler; NOT FOR USE IN STAND-ALONE HVAC INSTALLATIONS; Installer must verify proper vent direction and setup prior to installation and after any changes to discharge location have been made. Failure to follow these directions may result in property damage, personal

This manual reset blocked vent switch con?guration from Burnham Electronics provides an indication of a high and or low pressure condition within a circuit, while also providing easy reset capabilities of the switch. Featuring multiple mounting options on single and multiblock valve panels, this pressure compliant actuator complies with industry standard CPSC, UL508 and CSA Standards for electrical non-automatic actuated manually reset switches.

The Burnham 269170 Manual Reset Blocked Vent Switch is a replacement for the primary vent switch on some gas heaters designed with blocked vent capability. The burnham 269170 reset block switch replaces two other interlocked switches that will not operate correctly.

The Burnham 269170 Manual Reset Blocked Vent Switch is an ideal choice for appliance and vent installation, preventing damage to control panels and providing a functional and sanitary design. The NEMA 4X enclosure is suitable for Drip Pan applications, and the Reset Button has a 200 degree closure . The sturdy Bakelite plastic and brass body provides years of reliable performance.

With a 200 degree temp. rating, this electric switch is ideal for use as a vent or direct wire sensor in your forced air heating system. Easy to access and reset the manual blocked vent switch is designed to surround the vent with a key-locking blue cover.