RHEEM 175797 -Ruud 61-102211-07 "3/8x3/8 R410A 2Ton TXV 30""Cap"

"3/8x3/8 R410A 2Ton TXV; 30""Cap"

RHEEM brand 61-102211-07; "3/8x3/8 R410A 2Ton TXV; 30""Cap", For use on air conditioning and heat pump applications Meets or exceeds ANSI/ASHRAE Standard 34-1992 and all applicable federal standards, Rheem has been manufacturing quality products for residential and commercial HVAC applications since 1957.

Rheem Ruud 61-102211-07 3/8 x 3/8 R410A 2Ton TXV is most efficient. During the cooling season, this unit will cycle on and off using less energy to keep your home cool than a conventional system outfitted with a 3/8 line set.

Rheem's 175797 Ruud 61-102211-07 Quick Connect Steam Trap is a 2-ton, 3/8" x 3/8" application with a 30-inch cap. Designed to handle R410A refrigerant liquid or liquid/gas mixtures, the trap is intended for use in heating and cooling systems for homes and commercial applications. It features a non-askew design, solid brass body construction, synthetic packing, and a stainless steel spring.

The RHEEM RXV EVAP 3/8X3/8 Capacc Unit is designed to recover and recycle the refrigerant for more efficient gas and energy utilization. The RXV Evap Control is designed for use with 10'' or 13'' diameter coils in residential & light commercial systems, recovering the refrigerant back to the outdoor unit for re-use. The TXV Control Capacities are 2 Tons.

Rheem/Ruud R410A twin 30"" capacity, dual stage thermostatic expansion valves. Each terminated with a 3"" cap and 3/8"" fluid pipe connection.

The Rheem 175797 2 Ton TXV is designed to manage refrigerant flow in home central air conditioners with outdoor coils (condenser). These TXVs are used to transfer refrigerant between the indoor coil (evaporator) and the outdoor unit (condenser).

Ready for installation, this package contains (1) attic attic gas furnace; (1) condenser; (1) 30"" TXV air conditioner; (1) 16"" x 16"" filter; (2) 30"" flex copper line with thimble; (1) 4""x6" Step straight hard sleeve; (1) 8"" x 3/8? nickel plated female threaded elbow; (2) 9 1/4"" nickel plated straight hard sleeves; (1) 15"" x 5 1/4? x 21 1/2? rolled sone pad; controller and wiring harness