HEIL QUAKER / ICP 210784 Heil Quaker/ICP DOOR SWITCH INTERLOCK S

DOOR SWITCH INTERLOCK S

The HEIL Quaker/ICP DOOR SWITCH INTERLOCK S is a switch that is located on the front door and when triggered, this switch sends a signal to the ICP control unit. Once this signal has been received by the ICP control unit, the unit will permit heating or cooling operation. However, if there is a condition like backdrafting (and other conditions), then the ICP control unit will block operation of the furnace or air conditioner and show an error code

HEIL QUAKER / ICP 210784 Door Switch Interlock & Non-Combustible Transformer Kit. For Quaker & ICP TIG Welders *** 210784 HEIL COMBUSTIBLE TRANSFORMER DOOR SWITCH INTERLOCK KIT -------- FOR USE WITH THE FOLLOWING TIG WELDERS:

Inspector Certified Part Replace for the Following Listing: ICP 210784 Heil/Quaker Door Switch Interlock

This genuine Intermatic/Quaker/ICP door switch is designed to replace the external delay door lock and interlock switch on commercial refrigeration systems. The electrical contacts provide a continuity path when the cabinet door is open, so the condenser and compressor will turn off. (The compressor will not turn on when the door is accidentally left open.) After up to 10 minutes, or when the door is closed, the compressor and condenser are energized again.

The Heil Quaker/ICP is a single axis door interlock switch with a switch rating of 10 amps @ 120VAC.

The HEIL QUAKER/ICP is a door interlock switch assembly for commercial use. The interlock requires ‘ON’ of the access door to energize the heating elements. The unit provides PTC (positive temperature coefficient) contacts which prevent grounding of live power and allows two-wire connection to R, Y, PS or WTG. The Heil Quaker/ICP can be used with both resistance (R, Y, PS) or inductive loads (W

This item is an Interlocked Switch (Low Voltage) for Heil Quaker and ICP HVAC Products.