NORDYNE 626418R 626418R L150-20 LIMIT c L150-20 LIMIT c

130-150F AUTO Limit Switch

NORDYNE 626418R 626418R L150-20 LIMIT c L150-20 LIMIT c *** 130-150F AUTO Limit Switch

The Control Solutions L150-20 LIMIT c Limiting Vent 2 Wire Control is a 1/2" NPT Limit Valve designed for Commercial Hydronic Systems and Boilers. The L150-20 is Factory Set at 130-150F and features Flexible Lead Wire, 7/8" End Connector inlet threads, and Aluminum Construction.

The L150-20 Limit Switch is designed to work with NORDYNE Strain gauges, to eliminate false alarms such as long ground balancing. These limit switches are used for general ignitor and pilot light burnout protection. (Sold individually)

The L150 is a 150 Ampere, 120/230 Vac, 6 pole, 80kAIC Instantaneous Max. I-TEMP (IP56) microprocessor based Limit switch ideal for panel mounted and DIN rail mounting. Featuring advanced features such as ramp curves with instantaneous and preset options, soft starts/stops + multi-level quantization for position adjustment, the L150 offers high reliability and long term value to help ensure your operation's success. The L150 is intrinsically

The L150-20 LIMIT c replaces a defective switch or adds additional switches for a system.

The L150-20 LIMIT c is a standard limit switch used primarily in the A/C industry, the L150-20 permits free travel of the actuator until it contacts a set of limit stops at which point the affected circuit is turned off. The limiting mechanism permits accurate positioning of the actuator within a given range. The NORDYNE L150-20 has 3 leads: 1 hot, 1 common, and 1 switch position. When the actuator lever contacts either of the