NORDYNE 626497R 626497R L115-20 LIMIT c L115-20 LIMIT c

95-115F LIMIT SWITCH AUTO

The NORDYNE L115-20 LIMIT Switch, manufactured to NORDYNE's stringent specifications, is a 115VAC/230 VAC single pole, single throw (SPST) snap action electronic switch that is designed to limit current flow to a load between 90 and 115 amps. The switch features cover terminals that accept 11/32 inch male spade terminals and provide connection for control of large direct current loads. The 95-115F LIMIT SWITCH AUTO has a lower temperature rating than the 80-95F UNLIMITED LIMIT SWITCH to accommodate certain heating applications. The CAR

The 626497R Limit Switch is for use with Nordyne's 95-115F Radiator Thermostats. The Limit Switch has a sturdy plastic switch, and can be easily mounted to appropriate surfaces using the included mounting bracket.

The 626497R LIMIT Switch AUTO is an on-off electrical switch that provides control for small appliances, engines, motors, and other devices with crescent type connectors. Ideal for kitchen or shop use, it has two wires and a green/red light indicator. The 626497R LIMIT Switch AUTO is UL listed.

NORDYNE 626497R 626497R L115-20 LIMIT c L115-20 LIMIT c is a Limit Switch. This limit switch is designed for use with the Nordyne Flex Heating Pump L115-20 LIMIT to stop the pump when its temperature reaches 115°F.

This single pole, NC single throw switch will signal a change of state when the temperature rises above 95F or falls below 115F.

Nordyne 115-20 Limit Switches are designed for use on freezers and refrigerators. Features include: Steel and brass frame, Limit point adjustment screws, Limit Contact resistance: 15 to 45 ohms at room temperature, Operating temperature: -20 to 80 degrees C, NEMA 4X enclosure design

The 626497R L115-20 LIMIT c temperature limit switch is UL-listed for dry and wet applications.