Lennox 59W45 L150-40F LIMIT SWITCH L150-40F LIMIT SWITCH

L150-40F LIMIT SWITCH

The L150-40F LIMIT SWITCH is the correct replacement for many Lennox® brand furnaces.

The L150-40F Limit Switch is designed for use with Lennox 71, 91, and 92 Series Air Conditioning Systems. It is rated at 15 amps and 40 volts AC/DC.

The L150-40F is a Limit switch that stops the motor if it is turned too far. The case is 22-1" long and can be mounted on a surface or panel. To mount this Limit Switch, remove the insulation plate to expose the screws. Once the screws are exposed, mount the Limit Switch in the desired place.

The Lennox 59W45 Limit Switch is used to control the operation of gas, electric, oil and steam heating equipment. This switch features a snap-action mechanism that mechanically opens or closes when the switch reaches the appropriate end of its travel. The L150-40F Limit Switch can be used with natural gas or LP (liquid propane) systems.

The limit switch and wiring harness will fit the Lennox L150-40F furnace.

This Lennox LIMIT SWITCH is identical to the Limit Switch produced by Lennox using their original component suppliers. It is designed for use in all Lennox split systems manufactured since 1999, which includes selected 2-Stage units manufactured through 2010. This item is the white push-button switch with a tinted face and limits temperature at low stage (the cold air conditioner stage), also called "cooling".

The L-Series Limit Switches are designed for HVAC applications and are compatible with Lennox Residential and Commercial Series ducted heating, ventilating, and air conditioning (HVAC) equipment. The series includes 58W, 59W, and 79W Limit Switches. These models make it easier to match the limit switch to your application, while providing quick removal of the barrier valve.