Reznor 130768 ORIFICE PLUG 1.20 MM-BRASS ORIFICE PLUG 1.20 MM-BRASS

ORIFICE PLUG 1.20 MM-BRASS

These 1.2mm orifice plugs are made of brass and are used in many industries. This includes, but is not limited to the beer industry and chemical industries. They are used as orifice plugs on micron filters in plate and frame housings where the filter element is exposed to the atmosphere. These filters can separate even the smallest particles from liquids and gases using a variety of screening mesh.

Countersunk brass plug for 1.20mm diameter holes - this is a more traditional pipe plug that you might find in a bath. Designed to fit into narrow pipes, an example application would be bathroom drains where the outlet from a washing machine has been fitted via the top of the U-bend.

Brass Orifice Plug used for Hydro Dynamics aerators and diffusion plates.

Use this plug to orifice pipes and hoses for use with gases such as hydrogen, acetylene, nitrogen, oxygen and others. The opening is 1/8 inch.

Our thermal expansion plugs provide a cost effective solution for protecting copper and CPVC water distribution systems from freezing damage caused by thermal expansion. Plugs are routed into the line to prevent damage from occurring to the system, control valve or meter.. This is a 1.20 mm (30/64") NPT plug.

The proper size and design of the orifice helps achieve optimum air/fuel mixture which results in efficient combustion. This orifice was designed to work with a Reznor 130768 (1.25 mm orifice) burner. The correct selection and placement of orifice will allow you to idle your boiler at your preferred setpoint.

Flaring tool for 1/4" copper to 1/2" Copper. The O ring is made from soft material, which makes it easier to use than traditional metal ones.