Baldwin 6321102LLS 6321 102 LH LS LEVER MORT LOCK 2.5 BS LESS CYLINDER

6321 102 LH LS LEVER MORT LOCK 2.5 BS LESS CYLINDER

Never lock your keys in again with this Baldwin 6321102LLS 6321 102 LH LS LEVER MORT LOCK 2.5 BS LESS CYLINDER. It features a full body lever mortise lock for doors 2-3/8" to 3-15/16" thick and comes complete with all mounting hardware.

With the Baldwin 6321102LLS 6321 102 LH LS LEVER MORT LOCK 2.5 BS LESS CYLINDER, your door will be fitted with a 2.5" backset mortise lock, complete with a 2" minimum throw bolt. This lock is equipped with a rekeyable cylinder that allows for replacement or change of the existing key at a later date.

The Baldwin 6321 102 LH LS LEVER MORT LOCK 2.5 BS LESS CYLINDER is an excellent quality product from the good folks at Baldwin. The setting of this lever mortise lock provides a 2.5 turn cylinder, a snap in cylinder and a 6 pin tumbler. This lock has the capacity to add an electronic keypad, use key in knob, door viewer and changeable core features

We have several Baldwin lever mortice locks available in our store, including 6321-102-LH LS LEVER MORT LOCK 2.5 BS LESS CYLINDER. Our prices are some of the most competitive online so we encourage you to browse the rest of our Baldwin collection as well as all our stylish hardware products. Note that if you are in need of a specialty hardware product during your project, feel free to give us a call at 1-800-685-8880 and we will see if we can locate it for you. Or, please fill out our Request for Quote form.

The Baldwin 6321 Series Mortise Cylinders are constructed of brass & steel and feature advanced lever technology. They can be used on single doors and have a 2-1/8" latch throw. The Baldwin 6321 102 LH LS Lever Mortise Lock w/ Cross Bore is NOT field convertible to the Baldwin 7321 series mortise cylinders.

The Baldwin 6321 102 LH lever mortise lock features a case hardened steel cylinder with 2 1/4 backset dimple lock for 2 1/2" bore, case hardened steel throwbolt, fixed latchbolt and standard trim. The adjustability provided with the large walkable shoulders on the inside and outside make this lock adaptable for installation in wood jambs or steel jambs.

Designed for doors that have been "set up" with bore holes. This lock features a face bore that is lined with hardened steel to prevent drilling and pounding through the lock. The 2.5 in Less Cylinder is designed for a 2-3/8 in to 2-3/4 in thick stile. The most common functions for this are mortise, rim and full mortise or rim locks.