NORDYNE 632183R 24" T-COUPLE H 24" T-COUPLE H

"24"" Thermocouple"

"24"" THERMOCOUPLE"

The CLT-H series is NORDYNE's standard thermocouple for welding, soldering, and brazing common metals like carbon steels, stainless steels, aluminum, copper, etc. A standard straight 24"" long thermocouple.

This 24"" T-Couple with Nut and Bolt is used for connecting three wires together. The top of the T screw fits into a pipe or tubing end while wires attach to each arm of the T-Couple."

H 24"" T-Couple in Carbon Steel

This is Nordyne 632183R 24"" T-Couple H for the MANDARIN-24N Series. This item is a replacement part that was installed from the factory at the time of installation.

This 24"" 3 wire T-Couple for use with iron pipe steam heating systems is constructed of brass. It is designed to connect two lengths of iron pipe steam heating pipes together and provides a secondary method of safety in preventing leakage or rupture into an occupied space. It is used as part of a complete steam heating system installation and rated for use at 265 degrees Fahrenheit, nominal 90 degree Celsius, and a maximum working pressure of 105 psi and 250 degrees Fahrenheit, 535 degrees Celsius Maximum temperature.

The T-Couple H/N is a thermocouple with 24? leadwire. T-couples are used in indication and control circuits that measure and switch low voltage dc from –55°F to +500°F (-48°C to +260°C). Wire lead lengths are 6? to 100? (15.2 cm to 254 cm). Exposed leads can be bent or wrapped around a grounded metal part for connection to plus and minus wiring. Tinned copper lead wires provide better electrical conductivity and corrosion resistance than bare copper wire.