Baldwin 6732055 6732 Interior and Entrance Lock with Backplate for 2-1/4" Doors, Lifetime Polished Nickel

6732 055 OVAL TURN PIECE

The Baldwin 6732 055 oval turn piece features an adjustable, left/right-handed, reversible design. This product is a member of the Baldwin Hardware Lifetime Polished Nickel finish collection. All Baldwin Levers are designed to meet applicable building codes, and are tested to ensure a minimum of 500,000 cycles of operation.

The Baldwin 6732 055 Oval Turn Piece Entry lockset is perfect for installing a rotating handle on 2-1/4 inch doors. The solid brass keyed cylinder can be easily rekeyed to match your existing keying system, while the turn piece has a lifetime mechanical warranty. The polished nickel finish enhances the look of any home and comes with backplates and hardware for a complete installation.

Baldwin's 6732055 6732 oval turn piece is perfect for steel screen doors and interior entrances. This solid brass oval turn piece has a lifetime polished nickel finish, and comes with the backplate that screws onto the door frame.

Baldwin introduces the decorative 6732 interior and entrance door lock with backplate in polished nickel. The elegant styling of this traditional mortise lock, with its distinctive ovalturn piece, provides a polished look for a variety of décor styles. This decorative latch features a spindle bore of 7/16 inches for installation on 2-1/4 inch thick doors. Its cam and driver feature bronze construction, while its easy-to-install spindle is zinc plated for corrosion resistance. This Baldwin product is compatible with residential doors and requires a 35mm backset.

Baldwin's range of decorative Ironmongery is widely used throughout the Home in all aspects of Interior Design. These products are ideal for enhancing the design, colour and texture of any room while providing lasting durability. Baldwin Ironmongery offers an extensive range of internal fittings, from traditional Mortice Locks to contemporary Oval and Square Dummy Centre Turn Pieces.

Plug the lock and strike into the assembled door and latch assembly. use a 3/4 inch drill to remove the predrilled plug. Drill 1-1/2 inch deep holes in the strike side of the door. Use flat tip screwdriver to turn oval turn piece until it is at right angles with the face of the strike. Install and screw in other side of strike.

Baldwin's backplate and turnpiece collection allows you to create a customized look that is as individual as you; you select the lock and then the series of backplates in a similar finish. The Baldwin backplate is easy to install on your door. Simply choose the operating handle that compliments your lifestyle, then the backplate color that matches your home décor. The chrome plated strike will match with any decorative trim. To complete the look, select a coordinating faceplate.