120V Induced Draft Blower w/Gasket
RHEEM 177226 Ruud Weatherking Factory OEM Protech Parts 81 Furnace Vent Blower - Draft Inducer 120V Induced Draft Blower w/Gasket
Induced Draft Blower w/Gasket - 120V. This is a replacement inducer blower for the Ruud Weatherking 81 furnace. It features a 5 blade design and comes with the gasket.
This Induced Draft Blower is used on Rheem/Ruud Furnaces. This inducer motor goes around the burner assembly to pull air into the furnace for combustion, circulate warm air and exhaust from the heat exchanger. The base of this inducer motor has two mounting holes that allow it to be bolted down on a flange. This inducer motor also comes with a bracket that allows it to be slanted up and down so you can adjust belt tension on the pulley.
A Protech Parts replacement induction blower optimized for Rheem Residential Furnaces. A Full Function Induced Draft Blower that provides circulation of combustion/exhaust gases in heating systems used in residences. For use on the Rheem models listed. This blower is NOT designed for forced air systems, or central heat and air units.
You are bidding on a fully functional and tested RHEEM model 177226 blower assembly. This induced draft blower will fit various Rheem/Ruud/Amana furnaces. The blower wheel measures 5 1/2" in diameter with a 10 1/4" frame. Check your installations to ensure this part is correct.
Rheem Ruud Protech Parts 177226 Furnace Blower - Draft Inducer (OEM) - The Ruud Protech Parts 177226 Blower is an induced draft blower used on picture and wall furnaces. This product is a replacement blower for the following part numbers: (CAD)RHEEM/Ruud: 2AA9717, 2AA9720, 2AA9721, 27A1533, 27A1534, 27B4116, 30G5190, 86184107417; Utility Products: 898307M1; York: 309579
Keep the cold on the outside with Rheem's Ruud Weatherking Protech Inducer Blower and Gasket. This blower will ensure that all of your cold air stays outside while you keep warm inside your home or business.