24V 1" X 1" COMBINATION STANDING PI
This 24V 1" X 1" COMBINATION STANDING PILOT GAS VALVE is a replacement part for the following gas valves:
This Combination Gas Valve is a 24 Volt combination gas valve featuring a Non-Volatile memory. It is a direct replacement for all 24V 1" X 1" combination standing pilot gas valves.
The 4515 is a 24V 1’’ X 1’’ combination standing pilot gas valve with a push button gas control for use in commercial air conditioning systems. The valve has a brass body and a stainless steel bonnet, two sets of lift wires, and can be installed as remote mounted or as close mounted.
The COMBINATION STANDING PILOT ( no pilot/ignition required with 1" gas manifold) strictly controls the gas flow for precise flame adjusting and simultaneous ignition of multiple burners. The Electronic Combination Standing Pilot valve is designed to be used on all types of gas appliances that will be operated in a steady-state condition, but never in continuous use.
The Robertshaw 4515 Combination Gas Valve is a 24 V combination gas standing pilot set and high limit control. This combination gas valve consists of the voltage regulator, a pressure sensing device, boiler controls, safety controls and a standing pilot to control up to two burners on a gas fired water heater.
A range of variable standing pilot gas valves are available in a variety of sizes, configurations and outputs from 2.5" to 10" for either Natural Gas or Propane. Each unit is made with a combination brass or stainless steel body with field-adjustable pilot flame positions for a one-of-a-kind custom built fitting at an unbeatable price.
#4515-SLIDING VALVE TYPE CU/CU, STANDING PILOT, (1/2" MNPT IN), NAT GAS OR PROPANE, WITH 1/2" MNPT IN RELIEF TUBE.