Hydrolevel 4561 120V LOW WATER CUT-OFF WITH MANUAL

120V LOW WATER CUT-OFF WITH MANUAL

The Hydrolevel 4561 120V LOW WATER CUT-OFF WITH MANUAL is used for just about any plumbing job. With permanent hardwired float switch and 24 VAC voltage protection circuit breaker, these models will alert you to a running pump, even during the night. Designed for indoor or outdoor use, the [brand] lever lets you control your water flow with ease.

The Hydrolevel 4561 120V LOW WATER CUT-OFF WITH MANUAL is ideal for most residential applications. The 4561 has a steel case tank with a polyethylene liner. It features a pneumatic pressure switch, low level cord set and manual reset button. It is above ground installation only. It has a minimum temperature range of 33F, and can accept any standard garden hose thread. It's cutting capacity is .25 inch float.

The HydroLevel 4561 120V Low Water Cut-Off with manual is designed for the home or small business owner looking for an easy way to prevent flooding. The cut-off features an easy-to-use dial that will shut off water flow when the pool or spa reaches a preset water level. The pump will turn on again automatically once the desired water level has been reached.

Our 120V Hydrolevel Water Cut-Offs allow for a manually or automatically controlled water supply to plumbing or irrigation systems. With manual, automatic and float operated controls there is a perfect Hydrolevel Water Cut-Off for your application.

The Hydrolevel 4561 is a transformer-driven electronic float switch with 120VAC low-water shut-off and manual reset. The switch includes a built-in heating element to prevent freezing, and has been designed for applications such as freeze protection for domestic water systems or as part of pump shutdown relays. Switch provides fast automatic operation once the tank level reaches 'on' indication. When the tank empties below the 'discharge' setting, the float drops, causing the switch to shut off the water pump. Once you refill the tank, water pressure raises the float above 'on' position which resets the

As a safety feature to protect both boiler and building owner, this pump switches OFF if the water falls below a minimum level. Since the water levels are determined by each view, when being viewed as a Maximum water level cut-off, the Pump will automatically stop whenever the water level dropped below maximum level.

The Hydrolevel 4561 is a low water shut-off, 120 volt float switch with an attached 3 foot long sensor rod and temperature probe. The sensor pole has a spring loaded tip and, for use in high pressure lines, each end of the sensor pole is capped with a rubber grommet. The probe slides into the center tube of the float switch.