TEKMAR
TEKMAR 076 INDOOR SENSOR Controls
The TEKMAR 076 indoor sensor is a low-cost, easy-to-use, indoor air quality sensor that can be used to measure the concentration of pollutants in the air. The sensor is small and easy to install, and...
My Account
If you are already registered, please log in.
Create your account and enjoy a new shopping experience.
Create A New AccountINDOOR SENSOR REPLACE 074
The sensor only replaces INDOOR SENSOR REPLACE 074. If you need another sensor, be sure your existing model numbers matches our part number.
The TEKMAR 35491 is a indoor sensor replace 074 the other parts are 90847, 90553 and 35026.
What makes the Tekmar 35491 indoor sensor replace 074? It's a perfect match to the Tekmar 35491 and can be used as a replacement to the indoor temperature sensor for your security system.
Our replacement indoor sensor will solve your issue on your existing Tekmar model 7701, 7710, 7755S and 7757S gas furnaces. If you have a gas operated unit that works on a stat and the pilot lights, but will not stay on or only lights for a minute or so, this is most likely your problem.
The Indoorsensor comes with a built-in transmitter and has a motion range of more than 350 ft. from the transmitter. (An extension cable is required.) This sensor also allows the Tekmar/Verifire IV system to communicate with other devices, such as thermostats or building lighting controls via Modbus RTU (BACnet to BACnet).
The TEKMAR 35491 Indoor Sensor Arm allows you to replace a broken 35491 sensor or upgrade your setup to a three-sensor arm. This Sensor Arm helps you optimize the lighting in your house or office, reduces energy costs and is designed for easy installation.
The TEKMAR 35491 indoor temperature sensor can be used to replace a damaged or missing indoor sensor installed inside an electric baseboard heating unit for the purpose of adjusting the baseboard temperature based on the ambient air temperature.