WHITE-RODGERS 99950 5.25" Lead J Type Receptacle Connector with .093" Male Pi, N/A 99950 .

HOT SURFACE IGNITOR WITH 5-1/4" LEA

WHITE-RODGERS' NEWEST 5.25" FLEXIBLE CONNECTOR IS AVAILABLE WITH AN UNIQUE "GLOVE-LIKE" MOLDED GRILL ASSEMBLY THAT CAN BE PLACED DIRECTLY OVER THE HOT SURFACE OF THE IGNITOR FOR EASE OF INSTALLATION. THIS CONNECTOR IS AVAILABLE IN WHITE, BLACK AND BROWN COLORS WITH .093" (2.4MM) MALE PINS OR .093" (2.4MM) FEMALE SCREWS.

The WHITE-RODGERS J-TYPE RECEPTACLE CONNECTOR is designed for use with hot surface ignitors (HSI) to provide a means of connection between the HSI and the receptacle. The connector consists of a base, a cap, and an insulator sleeve.

WHITE-RODGERS 5.25" Lead J Type Receptacle Connector with .

This is a great product to use for the hot surface ignitor with 5-1/4" lead. It has a .093" male pin, N/A. This product was designed so that it could fit into any wall box with ease. It is approved for use by the Underwriter Laboratories, Inc. It comes in white. The color of this item is white and it weighs 2 pounds.

Lead J Receptacle Connectors provide a permanent means of connecting a power supply to the load. The sockets are specifically designed for use with the HOT SURFACE IGNITOR, Model 99950 (sold separately) but can be used in conjunction with other brands of ignition devices. This product includes lead wires and mounting hardware.

WHITE-RODGERS 99950 5.25" Lead J Type Receptacle Connector with .

HOT SURFACE IGNITOR WITH 5-1/4" LEAD J TYPE RECEPTACLE CONNECTOR WITH .093" MALE PI, 2 POLE, 3 WIRE, 120 VAC 50-60 HZ, TRICLAMP #5 CANNED TERMINALS, METAL BODY.

The White-Rodgers, 99950 Lead J Receptacle Connector with .093" Male Pi, N/A is a hot surface ignitor. The product is 5.25". The Lead J Type Receptacle Connector weighs 0.4 lbs and dimensions are 6" x 5" x 0". It has 1 PO line.

A lead J receptacle connector with a 5-1/4" lead spacing and .093" male Pi is a hot surface ignitor (lead J type). It contains one each of 5/32", 3/16", 1/4" and 3/8" female hex MIP x .093" male Pi, #6-32, 2-56, 1/4"-20 and 5/16"-18 threaded holes. The voltage rating is 250 Vac at 60 Hz. The current rating is 20 amps.