WHITE-RODGERS 99951 Emerson Hot Surface Ignitor, 120V, Silicon Carbide.

HOT SURFACE IGNITOR WITH 11" LEADS

This white-rodgerson product 99951 is a Hot Surface Ignitor with 11” leads. ## Features: __________ Listing: 99951

This ignitor (part number 99951) is designed for use with select White-Rodgers ceiling fan control systems. This hot surface ignulator features an 11" leads with spade terminals and a 3/16" min screw connection. The part number on the actual product may include additional information, such as a size, color or other specification.

An Emerson exclusive! The White-Rodgers hot surface ignitor is designed for use with wood burning stoves and fireplaces. This hot surface ignitor is used in combination with a dual element to provide the safest of all ignition systems. Features include Silicon Carbide, 110 amp rating, 120 volt, contact carrier made of platinum lead alloy, 11" leads

The 99951 Emerson Hot Surface Ignitor provides a fast and easy start to gas appliances. This unit is designed for 120V applications. It features heavy duty, high-impact resistant thermoplastic housing for convenience provided by a 12 in. wire with a UL listed electrical connector fused 10A 250V. And this ignitor has an extended temperature range of -40 deg. F to +500 deg. F allowing it to be used in many different heating applications including furnaces, boilers, hot

The WHITE-RODGERS 99951 SCC Silicon Carbide Hot Surface Ignitor is designed for all conventional and baseboard gas furnaces.

This "hot surface ignitor" is designed for use with most space heaters, portable electric furnace blowers, and other electric heating devices installed with a single pole, single throw switch, and single element. Because instant contact is achieved with the hot heater or boiler element, there is no need to toggle the switch between "ON" and "AUTO," as is sometimes required when conventional thermal-magnetic igniters are used. The silicon carbide element provides a longer service life than the

The Emerson Hot Surface Ignitor 99951, 120 volts, 25 amps, has a silicon carbide cartridge and contains a fully insulated porcelain handle.