ROBERTSHAW 5733 24/120 VAC AUTOMATIC PILOT RELIGHT 24/120 VAC AUTOMATIC PILOT RELIGHT

24/120 VAC AUTOMATIC PILOT RELIGHT

This is a professional 24/120 VAC AUTOMATIC PILOT RELIGHT manufactured by ROBERTSHAW. This unit was tested on and passed these tests:

The ROBERTSHAW 5733 24/120 VAC AUTOMATIC PILOT RELIGHT is a spark extinguishing pilot light protection for HVAC equipment, labeled “NR” (Not Requiring Inspection) under ANSI Z21.15 and UL 498. This unit consists of a 9 kV miniature spark gap installed across the main voltage wiring of the HVAC system to provide circuit protection, as well as an automatic relight to restart the HVAC equipment after an interruption such as power failure or air conditioner or heat pump switch cycling.

This low profile and compact 5733 24/120 VAC Automatic Relight Pilot Control features a built-in Wind Sensor, Spring Return manual override, Adjustable Slider Dial with nighttime visible setting. The pilot can also be adjusted to meet varying altitude requirements. This part is a very important safety feature of any gas appliance and must always be in working order.

The 24-120 Automatic Pilot Relight provides hands-free, complete pilot ignition and flame adjustment for up to two burners.

A fully proportional 24/120 volt, air-gas pilot relight, with the convenience of a stay lit switch. The pilot may be manually lighted without the need to reset or reprogram the controller. Once lit, the pilot will continue to burn with a stable flame.

Robertshaw #5733, 24/120 VAC Automatic Pilot Ignition is a non-resettable Type 1, single use, phosphorous-triangle-head flash tube that utilizes Zero Contaminant Gas (ZCG). The Robertshaw #5733 has an impact resistant glass enclosure and is generally oriented vertically.

The #5733 is an automatic pilot relight designed for use with XCEL-branded automatic pilot valves. When the power fails, the device will automatically re-light the pilot. Automatically lights the pilot after a power outage As a secondary safety feature , should the primary automatic pilot relight fail to power the radiant system back up, this unit will safely re-light the pilot and provide power to the heater in case of a fire Standby Backup Burner capabilities when used with an unvented gas fireplace unit The 5733 can also be used as a single-pilot gas valve for supplemental heat