Field Controls 1115 - 7" Barometric Damper/Regulator Draft Control

7" DRAFT REGULATOR FOR OIL, WOOD, &

Versatile, cost-saving and efficient, the Field Controls draught regulator controls the supply of combustion air into a fire. This product is used in industrial and commercial applications including heating, boiler furnaces, bakeries, pizza ovens and processing equipment. 7" DRAFT REGULATOR FOR OIL, WOOD, & GAS FIRES

The Field Controls 7" Draft Regulator is barometric damper type for differential pressure control of oil, wood, and pellet burning systems. It can also be used effectively on low velocity sidewall furnaces. The device's mounting flange permits up to a 2" pipe or duct penetration in the ceiling below, while the ¼” NPT connection allows connection to the blower/furnace draft control port.

From the home bar to the wood stove, the Field Controls 1115 7" Draft Regulator offers versatile, quick and accurate, damping/regulating control of air flow. Ideal for all small combustion equipment applications.

The Field Controls® 7" Barometric Draft Control/Regulator opens and closes at a pull of the knob, and provides convenient manual damping control in woodstoves and gas/oil/coal furnaces. The sensitive, spring-loaded barometric mechanism senses changes in barometric pressure to adjust draft levels up or down. The damper can be left open or closed manually. The Field Controls® 7" Barometric Draft Control/Regulator is an alternative to expensive programmable thermostats

The patented Field Controls® 1115 barometric draft regulator/damper is an airtight yet adjustable regulator designed to control the rate of airflow through dampers and flue pipes on oil, wood, and pellet burning furnaces. The cylinder sits in front of the damper in a combustion (return) air circuit. An attached set point regulator cable is connected to the top of the cylinder. When set to a middle or neutral point, at zero torque, the field control allows enough air through

The Damper/Regulator is a Barometric Draft Control used to install at the top of a chamber to control draft for wood or oil burning furnaces.

Draft is a great way to lower the temperature of your oven and keep the heat in the back where it belongs. This 7" barometric damper/regulator Draft control will