120/60 1" N.C., GAS SHUTOFF SOLENOID VALVE, WATERT
The ASCO Series 292127 is a compact, pre-assembled, 1/4 NPT, normally closed, watertight enclosure with an electrically initiated two way on-off switch. It is a NACUMA DAN-EL 120/60 1" normally closed solenoid valve with a metal-to-metal spring plunger seal. The actuator shoulder is adjustable. The enclosure has a pneumatic actuator and can be installed in a panel or on the control board. It has a rugged polyvinyl chloride reinforced nytrile butylene diaphragm which is non-static
The 2 Way Aluminum Body Watertight Enclosure Gas Shutoff Valve is designed to manage fuel gas flow to the heaters in the airframe and engine compartment of most general aviation aircraft. The durable 24 volt, 1 inch N.O. normally closed solenoidized gas shutoff valve has a 1 5/8" orifice and features a NBR Butylene rubber-sealing diaphragm that converts from normally closed to normally open when activated by a 24 volt ignition source signal. The aluminum body includes a fuse and is sealed with high strength silicone gaskets for maximum protection against moisture barrier penetration.
The ASCO 292127 watertight sealing aluminum solenoid valve with PTFE seal operates in harsh corrosive environments. It controls the on/off function of a fuel gas shutoff valve. This 2-way normally closed (NC) valve has a 1" pipe size and is mounted into a flat panel for easy installation. The 21 CV flow rating offers reliable gas transmission. The nitrile-butylene rubber sealing provides excellent protection against particulates and helps seal against leakage.
The ASCO Watertight Enclosure Gas Shutoff Valve (1" Pipe) 2-way normally closed valve is designed with patented self-cleaning feature for two-way normally closed applications. It features durable machined aluminum body construction. This 2-way normally closed valve has nitrile and neoprene seal, 21 CV flow, 1" pipe size. It requires 12 VDC for operation and can be used up to 365 C (870 F).
The ASCO 292127 Aluminum Body Watertight Enclosure Fuel Gas Shutoff Valve is made from aluminum and steel. It provides a 2-way normally closed closure mechanism. This valve is suitable for shut off of first stage gas pressure regulator or gas water heater regulator.
Our ASCO Watertight Enclosure Fuel Gas Shutoff Valve is designed for use in self-venting, watertight enclosures. This factory assembled valve features a Nitrile Butylene sealing and 1-5/8" orifice. It's rated at 21 Cv Flow with a two way normally closed connection and 12V/DC voltage.
Featuring a stainless steel tank and a nitrile butylene gasket, this watertight enclosure offers long-lasting durability. Each gas shutoff valve comes with all the necessary hardware for installation. The normally closed position closes when the flow stops while the free port allows fluid to flow into the sump. The 2-way normally closed watertight enclosure is ideal for use in water supply lines.
Free Shipping
