WHITE-RODGERS 14427 90-170 3POLE 40AMP 24V CONTACTOR

3 Pole Contactors

WHITE-RODGERS 14427 90-170 3POLE 40AMP 24V CONTACTOR Used to control larger motors and contactors. Product Category Contactors - Magnetic, Starter; Contactor Type: Low Voltage; Number of Poles: 3; Voltage Rating: 230 VAC; Amps AC (Max): 40A.

The White-Rodgers 14427 90-170 3Pole 40Amp 24V Contactor is designed to regulate AC motor loads and protect motors from overloads and prolonged stall conditions. This 3 pole contactor has one normally open changeover, two normally closed changeovers, one auxiliary contact and 1 tripping mechanism.

This product is a 3-pole contactor that can switch up to 40 amps at 24 volts AC. It has an adjustable voltage, current and time setting for total flexibility.

WHITE-RODGERS 14427 90-170 3POLE 40AMP 24V CONTACTOR

This product is an industry standard 3-pole, 40A contactor manufactured by White-Rodgers. It is a replacement for a White-Rodgers part number 14427. It fits into 0.56" x 1.18" cutout and has a mounting depth of 1.03".

Replace your existing 3 Pole Contactor with this White-Rodgers 14427 90-170 Amp Contactor. This has a rating of 90 - 170 Amp, Voltage 24V and can be used in panel board or on load side of controls. It is a 3 Pole contactor with a Thermal Overload Protection Device and a Trip Free device for safe operation. It is rated to handle 10,000 Cycles at full load and has an Ambient Operating Temperature range from -25°F to +125°F.

This 3 Pole Contactor is a solid-state, high performance relay for home and commercial heating, air conditioning and ventilation control. It is ideal for use with 2 or 3 wire single phase control circuits. This contactor is UL listed and recognized under the CSA certification.

Make sure that the heat is always on with this White-Rodgers contactor. It has a rating of 90-170 amps and a voltage of 24 volts. It's capable of handling 40 amps of current, making it ideal for residential use.

WHITE-RODGERS 14427 90-170 3POLE 40AMP 24V CONTACTOR is a 3 Pole Contactors - Relay. It's dimensions are 4.8"H x 8.1"L x 5.3"W and has a weight of 1.02 lbs.

Contactors are electric switches that allow the user to control a circuit or device by interrupting current flow through it. They are used to protect circuits from damage caused by overloading, overloads can be caused by excessive current, excessive voltage and short circuits.