A.O. Smith 9007122015 9007122015 KIT PRESSURE SWITCH .75" WC

KIT PRESSURE SWITCH .75" WC

The KIT PRESSURE SWITCH .75" WC 9007122015 9007122015 A.O. Smith Kit includes the pressure switch kit N4 - W-3 (3/8" pl mercury), the pressure set screw and O-ring "M".

A.O. Smith 9007122015 9007122015 KIT PRESSURE SWITCH .75" WC is a high-quality replacement part for your faulty pressure switch.

A.O. Smith 9007122015 9007122015 KIT PRESSURE SWITCH .75" WC is ideal for constructing plumbing systems that require back pressure. It features a 120V with 1/2" NPT connection. This kit comes with two included switches, four inlet fittings, four outlet fittings, two pressure indicators, and a drain valve.

The A.O. Smith 9007122015 9007122015 KIT PRESSURE SWITCH .75" WC is a pressure switch designed to fit the AO Smith 920K3, 27418-3, 920C3 and 9HP pumps. The pressure switch is a mechanical device that regulates the pressure of water that enters through a faucet. It protects the pump from burnout by preventing the pump from running when too much water pressure exists.

Kit Pressure Switch .75" WC

This Kit Pressure Switch .75" WC 9007122015 9007122015 is a genuine OEM replacement part made for A.O. Smith water heaters with 6-12 months warranty

The A.O.Smith 9007122015 Kit Pressure Switch 0.75 NWC uses 2 terminals. It has a Pressure Range of 0 psi up to .75 psi (1 mbhr or 6 bar or 10.3 kPa). The switch is normally closed and will open when the set pressure is reached, which would put the lights out on the furnace. The Max Current is 48 Amps at 120 VAC 60 Hz and 30 Amps at 277 VAC 60 Hz. It can be used with systems with dry-coil control, close-tank control or thermal expansion tank controls and it's rated for