WHITE-RODGERS 14503 1 Pole Contactor 40 amp

1 Pole Contactor 40 amp

The WHITE-RODGERS 14503 1 Pole Contactor 40 amp is for use with a variety of heating, air conditioning and pool/spa applications.

WHITE-RODGERS 14503 1 Pole Contactor 40 amp. White-Rodgers 1 pole contactor 40 amp 240 Volt AC, 60 Hz, (1) NEMA L5-20R Receptacle, Class B Circuit Breaker. Used in a variety of applications requiring a single pole contactor with a 20A circuit breaker.

This is a White-Rodgers 1 Pole Contactor 40 amp 14503. The 14500 series is a very popular line of miniature circuit breakers and has been around for many years. This is a 120 volt product that has the two screw terminal lugs on the one side, and then it has the neutral and the ground wire pigtail coming out of the end here. It’s used primarily in residential applications where you’re providing power to an individual appliance or device, like a light fixture or refrigerator, garage door opener, any of that kind of stuff.

This White-Rodgers 1 Pole Contactor 40 amp is designed for subpanels with stud-type bus connectors. It has a voltage rating of 240 VAC, a current rating of 40 amps, a load rating of up to 100% duty cycle, and insulation class B. The contactor is made with a die cast aluminum housing and has an operating temperature range of -40 to 180 degrees Fahrenheit.

The WHITE-RODGERS 14503 1 Pole Contactor 40 amp is a single pole contactor that features a coil voltage of 120/240 VAC and a current capacity of 40 amps. This product comes with an enclosure of NEMA 4X and includes a storage class rating of IP67. Additionally, it contains a thermal magnetic trip circuit as well as an over-current trip circuit. Its function is to switch off and on power supply to electrical equipment, devices or appliances using low voltage and high current.

The White-Rodgers 14503 1 Pole Contactor 40 amp is a control circuit switch that is used to control electric heaters and pumps. The White-Rodgers 14503 1 Pole Contactor 40 amp is an electrical contactor that have the ability to be used in either a 100 amp or 250 amp circuit, but will only operate at their rated capacity. It also has an optional overload protection that can be used to protect the device from being damaged by voltage surges or short circuits.

This product is the #14503 1 Pole Contactor - 40 amp by White-Rodgers. This is a very well respected product in the HVAC industry and they are used to control single stage heating and cooling units.

The White-Rodgers 1-Pole 40 Amp 14503 Contactor has been used in residential and commercial applications. This White-Rodgers Contactor is a 40 amp, 1 pole, single phase loop with a trip setting of 145 amps -------------------------- The WHITE-RODGERS 14503 1 Pole Contactor 40 amp is designed to control lighting loads up to 3800 watts at 120 Volts. It has a delay time of 0 seconds and a manual reset contacts.