TJERNLUND 4859 Impeller Wheel Kit for HS1, GPAK1 Sidewall Power Venters

WHEEL KIT FOR HSUL-1, HST-1, HS115-

The TJERNLUND® Impeller Wheel Kit for HSUL-1, HST-1, HS115- VENTER features: ?" Steel wheel with high performance impeller made of stainless steel 304; ?" Continuously welded aluminum chamber; ?" Stainless steel shaft; ?" 100% gate metal watertight cover; ?" 500 RPM.

This wheel kit consists of four polypropellers and the necessary parts to fit onto the HSUL-1, HST-1 and HS115-S Sidewall Power Venters.

TJERNLUND 4859 is wheel kit for HS1, GPAK1, HST-1, HS115 series sidewall power venters.

The HSUL-1L wheel kit makes it easy to accessorize the HS1 and GPAK1 sidewall power venters . Just twist off the old wheels using the knob on the side of the Venter, and screw on the new set. The kit includes four black plastic wheels, a pair of gray aluminum hubs, and a pair of self-tapping screws to complete installation. Black ABS plastic wheels are UV-stable as well

The TJERNLUND 4859 Impeller Wheel Kit for HSUL-1 and GPAK- 1 Sidewall Power Venters is a single pair of replacement wheels and axles.

The Impeller wheel kit is designed to turn your HS1 and HST1 impeller into an easy-moving sidewall venter. This unique kit can be mounted on either side of the HS1 and HST1 with access from the outside or the inside of the trailer. The kit includes wheel, axle, spacers, 2 long shaft Allen screws and 7 short shaft Allen screws. Keep in mind if you are replacing an existing Impeller wheel kit you will need to replace the

The impeller wheels on your HSU furnace lose up to 50% of their efficiency every year. A Wheel Kit is an ideal way to regain that lost efficiency and stop the dusting line between your condo and condominiums. Our WHEEL KIT includes all the parts needed (except the motor) for a complete overhaul. The HSKIT1 kit includes our Impeller Wheel Kit, shaft, spacer, brush pack, Grease Ring, Finned Support, Seal, #