Johnson Controls 112163 A-4210-6001 DrainTrapW/BowlGuard & O'Ring

DRAIN TRAP W/BOWL GUARD REPLACES A-4210-601

Controls Waste Receptacle, DRAIN TRAP W/BOWL GUARD

The A-4210 Series Washdown Sump/Drain Trap with Bowl Guard is designed for use in wash down applications. It prevents debris in wash down water from entering the drain line and clogging the drain line.

The recommended replacement for the Johnson Controls Model A-4210-6001. This bowl trap with a scupper includes a black rubber gasket, metal drain screen and a ground wire post. The bowl has been reinforced with a solid stainless steel tube for added strength. Replace your broken bowl trap with this high-quality Johnson Controls drain trap replacement

The Johnson Controls 112163 drain trap features a bowl guard and O ring for additional water resistance in your commercial or industrial application. The unit includes one 1½"-dia. male threaded brass drain fitting and is suitable for use with the Johnson Controls A-4212, A-4212-BB, A-4212-100, C-4212 and C-4212-100 faucets.

When replacing drain trap assembly, close attention must be given to important details. Inspect for broken or missing spring guard, chipped plastic bowl guard, cracks in drain trap bowl guard walls

A great addition to your vehicle, this drain trap is corrosion resistant to prevent rust. It has a stainless steel bowl guard that helps prevent water from spilling away from the trap. This Johnson Steelworks part can be installed directly onto walls up to 1/8" thick, anywhere standard drain plumbing could be located, including under sinks and at RV sites.

The DrainTrap™ is a plumbing accessory for air-conditioning and refrigeration equipment which uses a high lift tube to drain condensate from an evaporation pan through the roof. In applications where there is insufficient head pressure to propel condensate, using a relatively small diameter drain trap, such as this one, has proven successful in evacuating condensed water from an evaporator. This practical accessory makes maintenance simple, easy and convenient. It also protects the drain line from debris that might otherwise clog or damage it.

Keep unwanted water and other contaminants from backing up during a faucet installation by using this Johnson Controls drain trap. Designed to prevent any buildup in the pipe, this drain trap easily connects to an existing sink or plumbing fixture with its quick-connect coupling for a fast and seamless addition to your home. O'ring keeps water from leaking into the room

The DrainTrap™ is a washdown part designed for use in industrial kitchens. It is used to prevent floor drain blockage by catching fats, oils, and greases (FOG) that are often used in industrial kitchens. The DrainTrap can be placed under any food-handling equipment that pumps liquids into its drainage system; it will collect the FOG before it can flow down the floor drain . The DrainTrap is made of heavy-gauge stainless steel and has a large surface area to hold more FOG. The bottom of the DrainTrap has an o-ring seal

Built into the drain of most dishwashers is a plastic or metal trap that blocks sewer gases that enter the dishwasher during operation. After many years of service, these traps can become clogged with mineral deposits, preventing water from draining properly. Removing the drain assembly allows easy access to the trap so maintenance or replacement can be done easily.

Controls offers a full line of replacement parts for your equipment. Our trained and knowledgeable technical staff is ready to help you find the replacement parts you need.

Showcase your clothing and valuables with our spectacular, clean and professional-looking under-counter clothes and laundry chutes. There's no need to crawl on your hands and knees to dig out the bottom of the washing machine – what a relief!