Honeywell 293514 AC11201 Temperature Sensor for Floor Heating Applications

FLOOR SENSOR 15' -30

The Nutone AC11201 is a non-contact temperature sensor used with thermostats to control heat/cool ventilators. The FLOOR SENSOR is used with the following systems:

The Honeywell AC11201 is an UltraTemp® -R Floor Sensor designed specifically for use in radiant floor heating systems. The sensor is adjustable, non-collapsible, and has a type K thermocouple sensor. NOTE: This sensor will only work with Honeywell FLOOR THERMOSTATS.

This is a floor sensor designed to be used with an electric radiant floor heating system. This sensor measures the temperature of the floor surface and delivers it to a thermostat.

Discreet, energy-efficient floor sensor alerts thermostat when temperature falls below acceptable range. Features an easy-access terminal block for grounding sensor to heating system's return wire. Sensor can be surface mounted or recessed 1". Temperature from Air: 33 °F

Sensor is designed for floor heating applications. This round sensor has 1/8" MNPT connections with 2M lead wire and is attached to a 15' cable. Sensor features adjustable calibration for accurate readings.

Designed for use with electric radiant floor heating systems that are installed above the floor and circulate heated water through tubing or cables. (For systems that circulate hot air, use the Wall/Ceiling Sensor, #293514.) For concrete floors only.

Check to see if floor heating is working properly with this electronic temperature sensor, which can be wired to Honeywell Thermostats. The 15 foot sensor allows you to check temperatures at multiple locations, and the 9 inch cord includes a strain relief for extra protection. The rated resistance is 5000 ohms per foot when measuring junction temperatures.