Accustat PSG Controls T-70 70F Preset Sensor 70F Preset Sensor

70F Preset Sensor

Our 70F Preset Sensor is fully compatible with the AccuStat and Advance Systems. The 70F Preset Sensor allows you to experiment with a variety of temperatures without the worry of overheating.

T-70 70F Preset Sensor can be set to your exact desired water temperature for brewing, and comes with a blank check disc used to record the factory preset temperature so you may adjust it. A solid state thermometer is located on the front of the unit near the heater block. The automatic turn off and low water sensors are also standard features.

The AccuStat T-70 70F Preset Sensor control is designed for applications where a set point is desired or an operator wants to over ride the controls microprocessor based control.

Accustat PSG Controls T-70 70F Preset Sensor is rugged, reliable and easy to use. Its preset temperature range is 45 to 70 degrees C with a 0.5 degree C accuracy. This is an ideal solution for the industrial environment where a set point temperature must be maintained. AccuStat Temperature Control Systems T-Series controllers offer enhanced features such as analog/digital push-button operator interface, 2 or 4-20 mA digital output, adjustable setpoint alarm and an extensive remote terminal capability.

Accustat 70F preset sensor controls feature built-in (entire length of heat tube) temperature sensors and low lead-in wire for ease of installation. Three models are available: T67F, T77F, and T97F.

An Auto-Air temperature sensor with a 70F/21C preset that runs from with the onboard Circuits-on-Modules (COM) board and supports the ON, OFF, AUTO mode alarm and reset functions.

Accustat T-70 controls accurately control the temperature and hold it at preset levels with a digital display that ranges from 50 to 70°F. Fan Speed Control allows operators to achieve uniform temperatures throughout the cellar or warehouse. The LED lens makes it easy to read the set point, operating settings, and alarm displays. Accustat T-70 controls are designed for 24VAC circuits and include 120VAC adapter cord, motion sensor switch, and mounting hardware.