AMANA B1370108 -Amana 300F M/R SPST ROLLOUT SWITCH 300F M/R SPST ROLLOUT SWI

300F M/R SPST ROLLOUT SWITCH

The 300F M/R SPST ROLLOUT SWITCH switch is manufactured by INTEGRATED PRODUCTS INC and they supply the quality and reliability you would expect. There are a lot of products similar to this one. That's why we provide this detailed comparative list that can help you make an informed decision before purchase.

The 300F M/R SPST ROLLOUT SWITCH is a single pole, single throw, panel mount switch that controls the movement of the oven door. The unit features steel construction and a wire lead design with fork terminals. This product can replace any existing Amana 300 Series roller door switches and is backed by the AMANA ONE-YEAR LIMITED WARRANTY.

The 300F M/R SPST ROLLOUT SWITCH is a 300-Volt 8.0 Amp, 120-Volt 3.0 Amp, 4-Pole THERMOMETER AND OPEN SWITCH designed for use with most electric ranges made by Amana that utilize a thermistor control system.

The Amana 300F M/R SPST ROLLOUT SWITCH is a press to trip with push button actuator and dual pole construction. This SPDT switch has silver contacts, a 1/2-inch NPT connection, and a silver contacts rating of 30 amps at 120 VAC. The amperage rating of the switch matches the heating element that is attached to it.

Amana brand - LSW300F M/R SPST ROLLOUT SWITCH. This is the switch located at the small door side of the m/r and is used during troubleshooting. A common application for this switch is on those units that are equipped with a one piece metal baffle. This switch allows the upper door to remain in closed position while accessing the front panel for service. This switch can be used on opening models as well or such purpose as adding an alarm chime to an existing control panel.

Amana network-ready switch provides centralized control over frequently used functions such as lighting, security, communications, and advertising. The 300F contactor module has the capability to control both heating and cooling loads as well as low voltage loads up to 150 Volts AC or 220 Volts DC. The 300F features a built-in potentiometer for monitoring voltages across control device contacts. It also has a 3 amp auxiliary output contact for overriding other devices. The 300F utilizes an industry standard 485 interface to connect with higher level controls such as building automation systems or a BAS.

This switch is made for Amana brand 300F and similar chest freezers.