American Standard 605XTMV1070 THERMO MIX VALVE, LOW LEAD, ASSE 1070THERMO MIX VALVE, LOW LEAD, ASSE 1070
The American Standard 605XTMV1070 THERMO MIX VALVE, LOW LEAD, ASSE 1070 model is sure to offer your family warm water every time. Installation of the water valve is simple and easy with the use of annealed copper or brass heat exchangers which are available at Home Depot. These models are very reliable and durable providing a sense of assurance that you won't have to worry about leaving the house early one morning to make a meeting only to find that
The American Standard 605XTMV1070 THERMO MIX VALVE, LOW LEAD, ASSE 1070 package contents: ASSE 1070
The American Standard 605XTMV1070 thermostatic mixing valve, low lead, ASSE 1070 is designed for commercial use in hydronic systems. It features a flow path from cold to hot, and is pressure tested at 300 psi. This valve is available with several interchangeable body finishes including copper, brass, stainless steel, and more. Install this mixing valve to regulate water temperature in homes with radiant flooring.
American Standard's new 605X Thermostatic Mix Valve has been shown to reduce chiller water consumption by up to 20 percent when compared to installed American Standard 605T (thru-wall tank) THERMO MIX VALVES. With the ability to run 3/8" line without a ball valve, this latest technology reduces the frequency of energy consuming pumps which in turn lowers operating costs. Features include:
The Low-Lead mix valves offered by ASSE 1070 comply with the requirements of the International Plumbing Code for low-lead assemblies. They are designed to be used with copper, brass, and plastic tubing for use on both hot and cold water applications. They shall operate at a maximum service temperature of 180°F (82.2 °C). Installation Instructions ___________ Copper Tubing Installation Guidelines _______ Stainless Steel Tubing Installation Guidelines __`` These mixers have a continuous rated flow rate of
Part of American Standard’s 605XTM Series, this thermostatic mixing valve allows you to maintain two separate water temperatures from the same water heater. Another feature is that it can be installed by the DIY handyman who has some experience with plumbing and electrical projects. In addition, installation is straightforward and similar to installing an ordinary valve because the instructions are easy to follow.
Low lead content/approved for use with potable water kit available. Approved by ASSE 1010 Low Lead Compliance Certified, NSF 61 Section 14 Approved and listed by IAPMO with the economy shower faucet THERMO MIX VIDEO