Apex GWR3883 Gear Wrench GW Medium Tap Adapter

TAP ADAPTOR LARGE

The nickel plating is triple electroplated to guarantee durability and long life

The GearWrench® GWR3883 Tap Adapter is designed to attach to a standard 3/8” drive ratchet or breaker bar to allow easier installation or removal of large or small internal hexagon socket screws

Insert the GW Medium Tap Adapter over the tap and hand tighten

Designed to fit the Apex GWR3883 Gear Wrench GW Medium Tap Adapter, this tap adapter fits taps with a large (1/2" to 1") shank and has a 3/8" x 12 tpi thread

If you’re looking for the best Tap Adapters on the planet, look no further than the GearWrench Apex Tap Adapter

Great for tapping 6-32 bolts of Forstner bits

This tap adapter can be used to turn a standard 1/4'' drive ratchet handle into a tap handle by fitting the ratchet handle into it

Durable, heat-treated steel construction provides maximum durability and long life

A tap adapter that is designed for use with 1/2" drive gear wrenches (GWs), manufactured after 1995

When you are ready to remove the tap, simply spin off the adapter first to avoid damaging your tap

When purchasing this product, you will get an Apex Tool Group part number GW3883, a Gear Wrench Tap Adapter, Made in USA, Tap End and other brands may be used as well

9 inch in diameter

12-1993, SAE J514 standard and Federal specification GGG-W-641f (MIL-T-5542)

Apex GearWrench 08 GWR3883 Medium Tap Adapter, 3/8-Inch thru 1/2-Inch, Fits 3/8-Inch - 1/2-Inch Taps; Larger end of tap adapter slips over male threaded tap

The tap adapter has a large end and will fit taps that are 0

4 inch to 0

*****GWR3883 Gear Wrench GW Medium Tap Adapter*****

Keep the adapter in place while you install the tap

TAP ADAPTOR LARGE

The GW Medium Tap Adapter, part of the Apex GWR3883 Gear Wrench, allows for quick and easy installation of a new style tap with one hand

This Apex Tool Group brand product is manufactured in United States of America and makes an excellent quality and durable tool that will last many years with proper care and use

9 lbs

It has a 3/8"-24 thread, an overall length of 4

The adapter is made of heat treated S2 steel and it has an overall length of 7-9/16", including the handle

The GW medium tap adapter meets ANSI specifications B107

GearWrench Medium Tap Adapter

The GW Medium Tap Adapter also features a Flat Nose End which makes it easy to apply more torque when loosening or tightening bolts

This is a tap adapter for the Apex Gear Wrench

25" and weighs 1

The hole in the adapter can accomodate a 5/16'' or 3/8'' drive ratchet handle

It features an extra deep T-handle, which means more torque and less slipping when you’re working with tough nuts and bolts

The thread size is 10-32 by 1/2 inch long

This item uses a metric tread form thread and conforms to ISO standard 1074:1975 class H

Designed for use on medium taps

The use of a tap adapter with a ratchet or breaker bar provides increased torque, resulting in less slippage and damage when installing oversized screws

Regardless of whether you’re working with a 7/8-inch or 1-inch drive ratchet and extension, this adapter will make sure that you have accurate and smooth adjustment every time