ARMSTRONG AIR R110070006 2 POLE SEQUENCER RELAY

2 POLE SEQUENCER RELAY

With a significant number of features, the ARMSTRONG AIR R110070006 2 POLE SEQUENCER RELAY is a great addition to your daily life. If you have been searching for an item like this, look no further. This is the one for you.

The Armstrong Air R110070006 2 pole sequencer relay can control humidity or dehumidilyse to the correct levels.

Armstrong Air's 2 Pole Sequencer Relay AR110070006 features a "keypunch" which turns the control relay off and on by simply advancing the armature away from or toward the contacts. It has a low current output for switching small loads. This relay has a contact rating of 30 amps at 120VAC, 60Hz.

Armstrong's Air R110070006 2 Pole Sequencer Relay is constructed with heavy duty cast aluminum shell, polycarbonate cover, steel hardware, and furnished with self-lubricating bushings. The cast aluminum shell is strong enough to withstand high heat, even if submerged in oil. This 2 pole relay can be programmed for up to 50 air conditioners or heat pumps to maintain the correct temperature of any room or building.

The ARMSTRONG AIR R110070006 2 pole sequencer relay is a special switch for appliances that must be turned on or off at specific times of the day or night. This particular model (gray cover) allows you to select 60 different on and off times on a 24 hour basis, making it great for refrigerators, freezers, AC units and more. The ARMSTRONG AIR R110070006 also features a 3-turn dial and a RESET push button on top to easily reset its programming.

The R110070006 2 pole sequencer relay. The Relay contacts can be powered from a 240VAC, 50Hz source up to 100VAC, 200mA. The contact ratings are 125VAC, 1A resistive or 120VDC, 10mA inductive. The power rating of the coil is 240VAC, 50Hz 2A resistive/120-250VAC, 0.8A inductive.The product does not contain household plugs and sockets for use within public buildings and is only intended for use with low voltage electrical components in accordance with local or national wiring regulations.

The Armstrong 2-Pole Sequencer Relay is designed to protect your air conditioner from overload and short cycling. The ARMSTRONG Manual Manual/Auto Switching Two-Stage Dual Purpose Relay is suitable for use with hydronic and hot water heating, and used as a controller for one, two, three or four stage systems. This Dry Contacts only relay works with only one heating or cooling system at a time.

The Armstrong Air 2-pole sequence relay has a non-latching, normally open contact output. It is a general purpose relay that can be used to control a wide variety of devices.

Sequencer relay is designed for air curtain air circulation. Relay works with two line voltage to function as a switch for controlling the condenser fan motor. Turn on the relay, the fan runs together with the compressor until power off. After power off, the relay will shut down the condenser fan motor. Perfect for running high efficiency variable frequency drive PSC motor for condensing unit of air conditioner system.

A ready relay with 2 pole connector to connect the heating and cooling sequences. Each of the poles secures to an automatic switch, enabling sequential operation. The circuit is actuated by unit sensors (Unit Relays) that will complete the power circuit.

The Armstrong Air 2 pole relay is used to switch On/Off, control the speed of mechanical devices, and control the operation of appliances. It requires 120 VAC current at 25 amps to turn on. One pole is controlled by the contact shutdown relay, while the other pole is controlled by the contact overload relay.

When it comes to home comfort, humidity control is a major consideration. The following devices provide this important service: whole-house humidistats, stand-alone humidistat consoles, and programmable humidistats that can be set to your preferred levels for cooling or heating at the touch of a button.