ASCO 8210G13-24V "3/4"" N/O

"3/4"" N/O

ASCO 8210G13-24V "3/4"" N/O is a fully enclosed non-delay circuit breaker, suitable for use in low voltage power distribution and control circuits. It has a mechanical trip function with reset and thermal protection. The product has double pole and single pole function, the trip current can be adjusted by the adjustable knob on the handle. It is suitable for use in a variety of applications, including construction sites, food processing plants, household appliances and more.

This 24 VDC, dry contact relay has four normally open (N/O) relays. It has a high current rating of 3 amps for each relay. The contacts are rated for 24 VDC or 0.5 amps at 250VAC.

The ASCO 8210G13-24V "3/4"" N/O is a safety switch for use in hazardous locations.

ASCO 8210G13-24V "3/4"" N/O

This ASCO 8210G13-24V "3/4"" N/O is a device that is also known as an electromagnetic relay with normally open contacts. This device has an operating voltage of 250 VAC and a contact rating of 4A at 24 VDC. It is commonly used to control AC power, and in its application, it can be used with any other devices that can be controlled by electronics.

Our ASCO 8210G13-24V "3/4"" N/O GFCI is a 3-pole, 4-wire, wall-mounted, general purpose ground fault circuit interrupter that provides Class A protection for personnel and equipment. The GFCI prevents electric shock by sensing changes of current flow and interrupting the power supply when unsafe conditions occur.

"Model 8210 Series Monitors provide complete protection to prevent over-voltage, overcurrent, and short-circuits from occurring. The compact enclosure design is ideal for smaller enclosures. Available in Normally Open (8210G) or Normally Closed (8210N).

This is a 24 VDC General Purpose Relay with Normally Open contacts, 1 Form "C" relay, 1.5 VA at 24 VDC coil voltage, 4 ohm coil resistance, 2 A switch current and 12-32 Vac/VDC switching capacity.

We recommend that you purchase this product at ASCO.

This 24V reed switch is designed to control lighting and appliances (such as pumps) that require a 3/4"" N/O. The internal magnetic reed switch incorporates an operating coil and contacts. The contacts can be normally open or closed when the switch is exposed to a magnetic field. The electrical contact resistance is rated at 1,000 ohms per set of contacts at 250VAC, with a holding current of 20mA continuous. A unique feature of this device is that the operating coil and contacts are encapsulated in epoxy, making it exceptionally resistant to moisture, dust and other contaminants.