ASCO 8210G75 Power Technologies VALVE 120/60 1/2" 2W NC

"1/2""N/C

120/60 1/2" 2W NC

Power Technologies 8210G75 VALVE 120/60 1/2" 2W NC

The ASCO 8210G75 Power Technologies VALVE 120/60 1/2" 2W NC is simply one of the most cost-effective and user-friendly controls valves on the market today. This control valve is ideal for a wide variety of industrial and commercial applications, a quick look at the valve's features will tell you why. The ASCO 8210G75 Power Technologies VALVE 120/60 1/2" 2W NC offers many advantages to users over traditional actuator driven controls; these include quiet operation and faster cycle times.

Designed for valves up to 100 psi, the ASCO 8210G75 Power Technologies VALVE 120/60 1/2" 2W NC can provide everything that you are looking for. All of the features that are found on all of the other items on this page and much more are also included on this item. If you want a great deal on a great product then you should check out the ASCO 8210G75 Power Technologies VALVE 120/60 1/2" 2W NC today because supplies won't last forever

The ASCO 8210G25 Power Technologies 2W 120V 60Hz VALVE is designed for the commercial and industrial user. The valve is UL/CUL Recognized as indicated on the face of the unit. The normal rating for this valve is 120psi @ 25°C. It has multiple positions and may operate in either direction. This valve has to be mounted vertically and when installed must be locked into position using a key lock cap screw supplied with the valve. We recommend a temperature of 0-60°C (32 - 140°F).

The ASCO 8210G75 Power Technologies Vacuum Breaker is manufactured by American Sanitary Control with high quality and durability. This product will last you for years to come, and has been tested by the Independent Standards Laboratory to comply with all applicable standards and requirements. The UPC number of this product is 671945861380, and its dimensions are 8.5"H x 8.5"L x 2.5"W.

The valve has a with FS7252 120 volt 60HZ plug, cap style and a discharge temp. of 41 degrees F. Melting point (ASTM D1796) is 600 deg F and maximum pressure is 5000 psig at 150 deg F ambient temperature. Thermoplastic material (UL-94) can be contacted by fingers, adhesion resistance (D3363) is 94 degrees sec. opacifier black material weight 1# per square foot tensile strength is 60 psi.