40VA TRANS 120V-24V PLATE MOUNT
Quickly convert a 120V electrical plug into a 24VDC power supply with the Honeywell 2007 AT72-D1006 (40VA/120V-24V) Transformer Plate Mount Primary Box Mount. This 4” x 4” transformer is designed for medical equipment and other products that require 24VDC and are designed to operate on a range of input voltages. It features upper and lower output windings, auto short protection, a compact body, fast connections with mounting
The Honeywell 2007 Transformer is a 120V to 24VDC power supply that provides 40VA. This transformer meets the UL requirements and can replace other manufacturers' AT72-D6 or AT72-DO6 24V-40V transformers for Honeywell Zone Controllers. The plate mount primary box mount offers service and installation flexibility because it can be used as either a wall-mount transformer, or as a lateral mounting surface in most flush mount locations.
Plate Mount Transformer This 40VA transformers are plate mount and can be used for 100/120/220/230/240VAC Panel Mount Transformers. The combination of primary and secondary coils makes the operation safer with no exposed high voltage terminals.
The Honeywell AT72-D1006 Transformer Plate Mount Primary Box Mount, 24V, 4" x 4", 40VA is a 120VAC/ 24VDC 1 Phase transformer designed for use with a variety of Honeywell smoke and heat detectors. The AT72-D1006 is designed to be mounted in a primary box.
The AT72-D1006 is a 4" x 4" transformer plate mount primary box mount, 24VAC/VDC. The core voltage of this transformer is 24VDC and the adjusts range is 16 to 28 VDC. The 40VA primary winded has 120VAC secondary A and B voltage. This primary box mount can supply 0.25 Amps constant current input at 20 Volts 20 micro amps/24VDC with rated current consumption of 0.7 Amps
The Honeywell 2007 Transformer Plate Mount Primary Box Mount is a plate-mount transformer that converts 120 volts of alternating current to 24 volts of direct current. This transformer comes with a manually controlled voltage regulator, and it can be used for primary boxes on 24 volt lighting systems.
The Honeywell 2007 AT72-D1006 is a 4" x 4" Plate Mount Transformer, with a 120 Volt primary that has a nominal output of 10.0 Amps at 100 Volts Alternating Current, and a Secondary 24 Volt with a rated output of 3.88 Watts at 72 Volts Alternating Current provisioned for use in a 120 Volt system, as demonstrated by its inclusion in the Honeywell PB70 Series Division 1 group D power supply units. This plate mount