Honeywell 2026 480 Vac Transformer W/ 12" Lead Wires Energy Limiting Overload Protection

48VA TRANS 480V-24V FOOT MOUNT

A 480 Watt Energy Limiting Overload Protection Transformer with 12" copper wires has a non-grounding secondary and plastic Case. This transformer can be foot mount or surface mount. It is designed to limit the energy to 480 Watts, and will not withstand a short circuit. Its core type is E and its voltage is 480 Volts. It comes with a 1 year limited manufacturer warranty for defects in materials and workmanship.

The 2026/24 split-phase transformer is ideal for testing and manufacturing of 24 V transformers. It accepts 480VAC, 60 Hz input and has four 48VA taps: 18, 24, 30 and 36 VA. The transformer is equipped with a 20A (continuous) circuit breaker for overload protection and terminal lugs are provided for connection to the transformer windings.

Protect your lights, appliances and other electrically powered devices from damage caused by power surges and lightning strikes by using this 480-volt energy limiting isolation transformer. It supplies up to 480 volts of electricity to a load that is protected from dangerous overcurrent as well as from powering down due to a blown fuse. The transformer has a 12-foot cord that allows for easy positioning of the load up to 12 feet away from the connection point, and it can be conveniently mounted on the wall or in a panel box.

A Honeywell 480VA transformer powers a rotating beacon that can be attached to a mast. The transformer includes an overload protection device that shuts down power when the load exceeds the transformer's capacity. The manufacturer provides a warranty for this product.

Snap-on type 480V power transformers are ideal for use on 480V electrical systems where standard transformer installation is difficult. These 480V transformers are furnished with 14 gauge, 3 wire grounded leads. They are painted with a high temperature enamel rated at 300°C. A built-in thermal overload protector will open the circuit to protect the transformer in case of overloading. The design of the transformer allows mounting to a wall or junction box. Specify mounting bolt length when ordering.

Energy-saving, high performance transformer. UL listed for safety. Transformer has a lead wire and output connections of 3-wire, 4-wire and 5-wire. Enclosed case is steel. Terminals are steel. Terminal connections are nickel plated copper alloy, crimp type with ODs 0.33/0.55/0.75 in., insulating bushings are thermoplastic with ODs 0.33/0.55/0.75 in., bushing insulators are EPDM solid with ODs 1X0.66/1X2.77 in., 1X

This 135mm Mounting depth 480V Transformer is an Energy Limiting Overload Protection. It is UL listed and CSA Certified to meet or exceed all safety requirements set by the Canadian Electrical code. Honeywell transformers are designed and manufactured in accordance with IEC 601-1 standards.