AMANA 167295 OEM Upgraded Replacement for Janitrol Furnace Vent Air Pressure Switch

"-.38""wc SPST Pressure Switch"

Refer to the "Pressure Switch Locator Chart" on the data plate of your furnace to ensure proper replacement. The original pressure switch will read in Pounds per Square Inch (PSI) and the new pressure switch will read in Inches of Water column (WC). Vent Air Pressure Switch

This is a high quality new pressure switch that replaces and provides an exact fit replacement for the pressure switch on exactly the same name brands of furnaces and other appliances that this pressure switch was originally designed to replace. The sensor may be slightly different but the threads are the same size, it is the same diameter, and it uses the same mounting pattern. Also there are no moving parts within the switch allowing for long life product durability. If you are not sure if this part will work with your specific equipment you should call the manufacturer or us.

The Amana AFV30-26 air pressure switch controls the fan motor of 3 or 4-speed, split system air conditioners and heat pumps. When the low pressure limit is reached the fan motor will be energized and operate whenever the thermostat calls for cooling...Furnace Vent Air Pressure Switch - Replace Janitrol Model PAS10"

This Amana replacement part is an OEM Upgraded Replacement for the Janitrol Furnace Vent Air Pressure Switch. This pressure switch is easy to install, and includes terminals that can attach to wires. This pressure switch measures 2 inches wide by 7 1/4 inches long by 3/8 of an inch high. This replacement part also has a 150-200 PSI range. The cord gets the power it needs from one wired terminal, and the pressure switch gets a grounding path though the other one.

The Air Vent Air Pressure Switch is a factory original replacement for Janitrol -TR series furnaces with 5 or 10-psig venting pressure switches. The switch is for use on the furnace side of the blower motor damper to turn on the gas valve and ignite the pilot at low ambient temperatures between 20F-70F, when the furnace blower operates.

Replacement for Janitrol Furnace Vent Air Pressure Switch with switch and control wiring, and OEM, vacuum tube design metal case in white color.

The Air Pressure Switch is used for converting a low voltage or direct 24-volt dc signal to a proportional higher pressure, -up to 125 psi- air signal, this switch must be in series with the air pressure sensing device to maintain the integrity of the sensing circuit.