Barksdale E1H-H15 1 -V Dia-Seal Piston Pressure Switch .5-15PSI Adjustable

.5/15# Housed 1SetPt # Switch

The E1H-H15 is a 1/2" Housed Pressure Switch used for Hot Water Heaters. Pressure range (Wb) 1 - 15 psi, pressure contact material Silver Platined, maximum operating pressure (psig) 30 psig, mounting flange size 1- 5/16", rated @24VAC ordCSA 140mA ohm Max, @115VAC ohm Max.

When one setpoint isn't enough, E1H pressure switches have the capacity for several. These rugged aluminum switches feature 1/2" ports and can handle up to 15 psig. One port can be configured with a tapered connecting rod and NPT bushing to use as a pilot at the same time. They are compatible with a variety of limited-life gases including CH4, C3H8, C3H6, C3F8.... as well as many alternative fuels (ethanol, gasoline, propane) with pilot valves down to 2/100"

The E1H-H15 Dia-Seal pressure switch is designed for use on hydraulic systems operating at 0.5-15 psi and with maximum temperature of 248ºF (120ºC). The housing is constructed of aluminum, the stem is stainless steel and the diaphragm is made of synthetic rubber."

Pistol grip 1-Speed, adjustable pressure switch with a 15# low and a .5# high-pressure switch. Horizontal application only.

The # 1/15 Barksdale E1H-H15 1-Volt Piston Pressure Switch is a diaphragm electrode switch that increases the pressure and capacity of any high pressure system. The diaphragm switch is durable, reliable, and easy to install. This switch fits perfect for pumps, valves, or high pressure requirements. The voltage and settings can be customized to fit your needs.

The Dia-Seal switch is the latest in modern high pressure switches from Barksdale. Barksdale has been manufacturing pressure switches for 50 years and they are one of the most reliable manufacturers of pressure switches. The adjustable range of 15 # offers a choice that is only available in switches costing three times as much.

The E1H-H15 1 -V Dia-Seal Piston Pressure Switch is designed for use with heating and air conditioning equipment operating at normal line pressure. This pressure switch is for use with hot or chilled water heaters. These switches are housed in a weatherproof metal enclosure for long lasting durability. They are UL listed and CSA certified to meet all safety and quality standards.