BECKETT 7505P152MU Igniter Primary Control

Primary Control

The Igniter Primary Control is a replacement part for your Beckett gas stove or fireplace. It consists of a primary control knob, electrode, and screw. This part can be used to replace any missing or damaged parts of your gas stove or fireplace, restoring it to its full function.

A primary control assembly is a single control that can be actuated to regulate combustion air and/or gas. This product is designed for use on natural gas pressure appliances having a combustion hot surface temperature not exceeding 450F (232C). Primary controls should be installed in a configuration that permits testing and servicing of individual components without taking the unit off-line.

The Igniter Primary Control regulates spark to the burners and is a direct replacement for most common ignitor primary controls. It is the longer version of the ignitor primary control with a 3 wire configuration. The Igniter Primary Control meets or exceeds all factory specifications.

The Igniter Primary control is used on the newer BECKETT manufacturing furnaces which utilizes a single stage two port system for increased efficiency and durability.

The BECKETT 7505P152MU Igniter Primary Control is designed by BECKETT Controls to replace your old or defective part. This Igniter Primary Control is built with rigid steel case covered by baked enamel finish. To prevent from overload and over temperature, this Igniter Primary Control has a thermal limit alarm function in DC voltage, max-on time and load current protection. Replace your old and deficient igniter primary control for dependable operation and value with new BECKETT 7505P152MU ignition control.

The 7505P152MU Igniter Primary Control is designed to be used with the BECKETT MI-XP Multi-Ignition Generator in conjunction with the system's LP Side Fire Box. The generator will give 100% control of room temperature, even when ambient conditions change. It can also be used in heating areas outside of the main heat area.

BECKETT Ignite 7505 Primary Control provides protection under certain overload conditions, detection of a shorted motor and will act as a hold down device to control motor speed under other conditions. This coil comes with two LED indicator lights and letters for trouble shooting and mounting hardware. 100-30 amps, 120/240 Volts - Coil has 2 red LED's to indicate connection status  -  One green LED to indicate Primary Coil is receiving power -  Letters on the face plate to aid in troubleshooting connections and wiring issues