Belimo ZONE24NC Zone Valve Actuator : 24V, Normally Closed

24V NORMALLY CLOSED ACTUATOR ONLY

Designed to be used with the Belimo Road Race, 24V and 12V zone valves, this is an actuator replacement only. The Belimo 24V Zone Valve Actuator produces a holding current of 0.04A at 24VDC for use with motors up to 65W. It can be wired to either Normally Open or Normally Closed applications. When wired to a Normally Closed application, this actuator will produce a holding current between 3-6mA. The actuators are designed to

The Belimo ZONE24NC zone valve actuation is a 24 volt normally closed actuator. This device is used for manually controlling valves or switches that require 24 volts of power. This device has an operating range from -30 to 120 degrees Celsius.

The Zone24NC is a normally closed actuator that controls dampers in heating and cooling applications. It operates on 24 VAC,18 to 38 VDC.The zone24NC model comes in two versions: the first is the standard model, with a manual valve lever; and the other is the upgraded version with an automatic valve lever.

With a 24 VDC rating and a normally closed setpoint, the ZONE24NC is designed for use with zone valves in commercial buildings, such as apartment or dormitory buildings. When activated by a 24 VDC controller, the actuator causes the zone valve to close.

The Belimo ZONE 24NC ?zone valve actuator is an input-type normally closed valve actuator with integrated power amplifier and 24V power supply. This makes it an affordable solution for all 24V zone valve applications where zoning control or t-stat feedback is required. Zone valves are used in a wide range of applications to modulate hot and cold water flow to specific areas of the building, often through the use of larger pumps and separate hot and cold water supply systems. A

A 24 V actuator designed for use with the ZONE24PE high performance zone valve and ZONEPCC control system. The M?kronoctor 24 V number of loops actuator (normally open and normally closed) is available in modules from 4 to 8, with a standard cable length of 2 m.

Offered with our innovative lineup of Zoning and Integration Actuators, the Zone 24 NC is a Normally Closed (NC) Zone Valve Actuator from Belimo. This mid-range actuator is extremely durable and useful in most applications. For combinations with other devices, see our full line of Actuators for more options! (Actuators are sold separately from zones)