Belimo B225+LF120-S | US | CCV | 1" | 2 Way | 30 Cv | w/ Spg Rtn | 120V | On/Off | SW

"1"" WAY 120V 30CV SSTRIM W/AUX"

The B225+LF120-S 1"" way, 120 V, 30 Cv, single stage, manual reset trim with auxiliary valve is a solenoid valve that functions as a standalone or as part of a control system. The 2 wire, 3 position mechanical switching function allows the user to switch the device ON/OFF from a separate location by remotely closing the circuit. The 2 wire open collector signaling function enables wired logic controllers to monitor the status of the device from a separate location.

The Belimo B225+LF120-S | US | CCV | 1"" | 2 Way | 30"" Cv | w/ Spg Rtn is an Actuator, Mechanical product manufactured by Belimo. The part number for this product is 78051200.

Features: 2-Way, Modulating, Incorporates fail-safe function, 120V 50/60HZ AC Power Supply. It is important to note that because of varying properties of different carrier piping systems, the maximum flows shown may not always be realized. The 30 CV should be used only as a guideline for selecting manifold applications. The actual maximum flow should be verified by testing before purchasing manifolds for applications operating over 30 CV

Belimo | US | CCV | 32 Amp | 1"" Reversing Valve w/ Auxiliary Valve

Belimo Inc. introduces the ultimate solution to save your investment in HVAC system...B225+LF120-S, 2 way direct acting valve with external control capability, swivel flange, 1" orifice and ASME B16.34 compliance confirms to NFPA 90A/ANSI Z21.15 standards. The mounting flange allows easy installation, configuration flexibility and opens up a wide range of applications including retrofitting residential and commercial buildings while enhancing the system reliability.

The Belimo B225+LF120-S variable speed pool and spa circulation pump is a 2"" 1/2 way, variable speed pool and spa circulation pump. The pump comes with an auxiliary outlet for variable speed pool and spa equipment. Its external voltage adjustment allows it to be powered at various voltages. It comes standard with a stainless steel pump bowl. Its variable speed operation allows for motor start/stop cycling to save energy.

The B225-LF120-S is a two-way valve with brass inlet and outlet (1 inlet/outlet), aluminum body, spade terminals inlet and outlet, spade lugs power inlet, 0 to 60 PSIG operating pressure, 0.5 second spring closing time with 30 percent overlap, 120 VAC operation. There is also an optional stainless steel damper actuator mounting kit available with two lift handle configurations.

The Belimo B225+LF120-S is the solution for high ceiling installations where an existing two-wire cable, or cable extension, will not reach. This is a combination controller / valve that controls the existing 120V fan installation via a double pole switch while using the same wiring (with some modification).

The BPV2+ is a 2 way, normally closed valve. As a two-way valve, it can be operated as a normally closed valve or as a normally open valve with external switching. The unit has an external pilot operated spool and an internal pilot operated spring loaded check. It is available in many ports, such as 1?, 1#, 1%.'', 2&"', 2#'.', 3&"', 3#'.', 4'', and 5'

The B-Series servo cylinder has an operating speed of below 100ms and a maximum speed of 2.4ms.Waterproof,dustproof,encrustation-free,extendable shafts,open/close limit switches or position feedback,and the max cycle life is over 120 million times.

The B225+LF120 is one of the most appreciated actuators in the industry for its consistently smooth performance, with stainless steel piston rod and aluminium endplates for durability. Its mechanical construction is suitable for heating, ventilation, air conditioning and refrigeration applications.