BASO BG1100MAAK BG1100MAAK DIRECT SPARK IGNITION CONTROL FOR C

DIRECT SPARK IGNITION CONTROL FOR C

The BASO BG1100MAAK DIRECT SPARK IGNITION CONTROL FOR C IGNITION SYSTEM is a DIRECT SPARK control with a push button assembly for 2, 3, 4-pole magnet motor ignitions. BASO's unit allows the user to pulse the magnetic switch or use a timed delay function.

The BASO BG1100MAAK is a direct spark ignition control for c . Constructed from durable polycarbonate that can handle mechanical stress. The BG1100MAAK is also easy to operate and comes with a simple installation guide. It has an easy to read display screen and thanks to the unique valve actuation system, it's ready to replace the microswitch/vacuum actuator any time.

Direct Spark Ignition Control for Gas Grill Models BG6400MAAG,BG6600MAAG, BG6800MAAG and BG6900MAAG is a microcomputer-controlled spark generator for single-burner gas grills. The unit uses two kinds of screens as ignition power supply switch, to keep the ignition process in 360 sec to 720 sec after each ignition process, which can benefit the ignition the speed 40%.

The BS100 is a direct spark ignition control for C-100/C-200 series propane gas logs that utilize a S20 input. This ignition control has NO adjustability and it is designed to operate on direct natural or LP gas. It does not have an overload protection and is specifically not for outdoor use.

The DSI-JP-FS01 is an Ignition Controller that can be used in direct spark ignition systems. Controlling the ignition timing according to the engine running condition, It has the effect of improving anti-knocking performance while suppressing abnormal combustion and noxious exhaust gas. This is accomplished by injecting a minute amount of fuel into each cylinder during the compression stroke to limit Knock.

The BG1100MAAK offers a unique panel design offering both traditional and low voltage control for ease of installation. This control converts the direct spark ignition to a 6 Volt direct spark ignition. The control offers a 0 to 300 degree or 0 to 400 degree plus auxiliary firing capability with multiple high voltage choices on the bottom rail.

Designed for use with the BG1100MAAK burner system, which features our patented Ignitor ® technology, the BG1100MAAK DIRECT SPARK ignition control is the most advanced solution available for torch firing applications.