BASO 232134 Bgn891-1, Module for Lennox 60j00 for Lennox Pulse Furnaces

PULSE FURNACE REPLACEMENT IGNITION

BASO P/N: BASO 232134 BGN891-1 MODULE FOR LENNOX 60J00 PULSE FURNACE REPLACEMENT IGNITION. The above mentioned part may be used in the following brand names and models: Lennox.

When replacing an ignition module in a pulse furnace or when replacing a pulse furnace, you must use this replacement Ignition Module. Do not install any other parts in the pulse furnace. This replacement module comes with a three-year limited warranty and is designed for use with 60J00 Pulse Furnaces only.

This replacement ignition will fit most 60J00 Pulse Furnaces. Note: Replacing the ignition requires installing this part along with replacement coils. BASO 232134 Bgn891-1

The BASO BGN891-1 Ignition Module is intended for use with the Lennox Pulse Furnaces 60J Series to replace the ignition module. When replacing one of these, an extra fuse should not be utilized. Always replace the fuse as well as the module with a brand new device.

This is a plasma ignition assembly (module) for Lennox Pulse Furnaces and replaces Lennox part nos: 60j00, 60j01, 60j02, 60j03 and 60j08.

Fits Lennox Series 80,90,100,200,300,350. Designed for Pulse Furnaces This replaces part number 120 2975.

Pulse Furnaces Replacement Module -For use with Lennox Pulse Furnaces only

The module, BASO 232134 BGN891-1, can be used in place of the existing PDM Module, P/N 05394622, for models 60J00-11100 and 60J00-11370. This module is designed to operate with both Touchpoint Ignition and Pulse Ignition wire bundles, provides complete protection for the furnace, and also comes with a power pack to provide heat to the plenum during soldering operations. If you are already using an ignition system on your furnace, you will need to change out the wiring harnesses inside the furnace to use this replacement ignition

The replacement ignition module is the control box containing all of the furnace's electronic components.

The BASO GPIB module is a direct replacement for the following part numbers: BGN891-1, PC242K2F00P4, PC243M2F00HR, PC242M2B26HR, PC242M2F00IR, PC243M2C00IR, and GPIBM15005. It is a complete replacement assembly with circuitry to replace the entire assembly found in the following Lennox pulse furnaces: 60J00A0; 60J02P; 70H0180AA; and 94T1410J01AA. The firmware and calibration code

This replacement ignition (module) is made of the highest quality materials and to the strictest Standards.

This is a pulse ignition module for: