BITUMASTIC 107-50-5 #50 PROTECTIVE COATING COMPOUND

#50 PROTECTIVE COATING COMPOUND

BITUMASTIC 107-50-5 #50 PROTECTIVE COATING COMPOUND is a solvent-borne, concentrated bituminous for applications to mineral substrates. It is intended for use in rehabilitating a variety of industrial and commercial roofs in the United States. The product can be used to extend roof life on flat or low-sloped roofs by sealing out moisture and contaminants. The product will not support combustion and may be used in parking structures, covered patios, walkways,

BITUMASTIC 107-50-5 #50 Protective Coating Compound is a solvent-free, single component protective coating designed for use on steel surfaces at temperatures up to 250°F (121°C). It cures to a high quality, protective film that helps prevent rust but does not inhibit or change the natural appearance of bare metal or painted surfaces. #50 PCB is a unique protective sealant specifically formulated for installation using commonly available airless spray equipment. It is applied via spray and

Bitumastic 107-50-5 #50 Protective Coating Compound is a mix of bitumen and semi-solid phenolic resin, which can be used for coating many different types of porous surfaces. #50 Protective Coating Compound provides continuous protection against water, air, moisture, salts, and acid gases for up to ten years. #50 Protective Coating Compound will not deteriorate in the presence of salt fog due to its inherently chloride reacting material properties. Bitumastic 107

Bitumastic 107-50-5 #50 Protective Coating Compound is a high solids, one component, solvent free, bituminous coating that resists deterioration caused by oxidizing agents, ultraviolet light, and alkalis. Bitumastic's unique combination of polymers and asphalt emulsions provides a tough weather-resistant coating that resists erosion in severe exposure conditions. It has excellent adhesion to concrete and metal substrates. Bitumastic 107-50-5 #50 Protective Co

Use Bitumastic #50 Protective Coating Compound on bare metal or directly over zinc coatings. If the metal is coated, the coating must first be abraded to assure good adhesion of the coating to the metal.

Bitumastic #50 Protective Coating Compound is a single component, asphalt emulsion product designed to provide excellent protection for concrete surfaces. It is used as: A highly effective primer and sealer for waterproofing applications involving floors, decks, walkways, walls or other surfaces where the transfer of water must be minimized. A protective coating produced using a family of low-viscosity asphalt emulsions containing synthetic oils with exceptional resistance to ultraviolet (UV) light. Bitumastic #50

< Bitumastic #50 is a heavy-duty protective coating compound that can be used on wood, concrete, steel, and other substrates. This coating is ideal for sealing off areas that are exposed to harsh conditions. It is quite thick and not watery like many other sealants on the market. You can apply this coating by brushing it on with a paint brush. It dries to a strong rubber but will not crack or peel even under the most