XR HDMI AND IR EXTENDER
BLACK BOX VX-HDMI-TP-100M XR HDMI AND IR EXTENDER
BLACK BOX VX-HDMI-TP-100M XR HDMI AND IR EXTENDER
HDMI signal and IR signal can be transmitted over one CAT5e/6/7 cable. Supports HDMI 1.3a. Compatible with all HDTVs, projectors and other HDMI devices. IR pass-through function enables control of the source device by an external remote controller (not included).
Extends HDMI and IR signals up to 100 meters over a single CAT5e/6/7 cable. The VX-HDMI-TP-100M is a high quality HDBaseT transmitter that accepts HDMI input and converts it into a high definition signal for transmission over CATx cable. It also has an IR pass through connector so that IR signals from the source can be extended along with the video up to 100 meters away. Compatible with HDBaseT v1.4b specification, this transmitter supports uncompressed 1080p video at 60Hz frame rate, as well as 3D video formats.
The Black Box VX-HDMI-TP-100M XR HDMI & IR Extender uses a single Cat5e/6 cable to extend an HDMI and IR signal via the public switched telephone network (PSTN) to any room. This product can be used in commercial, residential and industrial applications where a reliable and secure network is required.
Use the VX-HDMI-TP-100M extender with any video over an HDMI cable and transmit IR from your source to a destination. Simply connect the sender to your HDTV using an HDMI cable, then connect the receiver to your projector using an HDMI cable. Plug the IR emitter into any available port on the extender and connect it to your source’s IR sensor, allowing you to control the source device by pointing at the projected image.
The BLACK BOX VX-HDMI-TP-100M is a high speed HDMI and IR extender. The extender supports 3D video, full HD video, and digital audio at distances up to 100 meters (328 feet) over a single CATx cable.
The VX-HDMI-TP-100M BLACK BOX is the perfect solution for extending an HDMI signal via fiber optic cable up to 100 m at 1080p and IR extension up to 300 m on a single fiber.