BLADE - SAW for Hobart - Part# 00-477016-00142

BLADE - SAW for Hobart - Part# 00-477016-00142

BLADE - SAW for Hobart - Part# 00-477016-00142

For our customers that may need to replace their BLADE with only the REPAIR PART, here is the Hobart Service Part Number 00-477016-00142.

This new Blade saw is made to fit the Hobart Saw (part# 00-477016) when it is stored on a Hobart stand in the position of use A. Each Blade Saw is built to fit one particular saw, and includes a clamp to hold the blade steady while in use. However, installation of the saws requires that one remove the top cover from the Hobart Table Saw and replace it with an upper Blade Cover (p/n 00-105735-00733). The removal and replacement require about an hour be performed by a skilled technician. Because of this requirement, Hobart does not

The BLADE-SAW for Hobart is a must-have accessory for your Hobart saws if you need to cut Aluminum or Stainless Steel pipe. It also comes in handy for cutting down thick timbers and logs. The saw blade is 65" long with a 1/2" wide blade, blade pitch of 1" per foot and has 8 teeth per inch.

Hobart BLADE - SAW 9860. Used on Hobart C250, C400, C500, C600, and C800 noodle saws (Part Numbers 85-004316 thru 85-004322). Availability: IN STOCK - 5,000+ available. Sale! Low and slow!! Quantity Discounts for many other parts from the Hobart line

A BLADE - SAW is an attachment that enables you to make extremely precise cuts (even into ceramic tile) with your Hobart grinder. It clamps securely onto the barrel of the grinder, which provides maximum stability for cutting. Specially designed for grinding of ceramic, glass and stone materials.

This Blade is for the Hobart / Hobart Saw Model # A02357 The blade is straight, which was probably caused by a welding process.