FRYMASTER F13179K 108-1540 120 Volt Blower Motor Assembly

BLOWER MOTOR ASSEMBLY 12 0V

BLOWER MOTOR ASSEMBLY 12 0V This blower motor is designed for 2 bladed fanned blade outdoor fryers, constructed of a polyconically shaped solid steel, iron-magnetic, permanent magnet attached to three 2 ft long wires, terminating with plug. The wires fan out and attach to a terminal board which completes the circuitry. Blower Motor uses 110 V house current. The brass blade nut fits over the fan to hold onto the drum shaft. Used on the F13179K Frymaster 2 burner gas fryer models F12799 and F12919

The Frymaster F13179K is a Blower Motor Assembly designed to fit FRYMASTER model number F13179K. The Blower Motor Assembly features a three-speed switch and a four wire connection(s). It also offers a dual voltage, 120V/60 Hz and receives its power via a cord connected to an outlet box. Frymaster is the largest manufacturer of commercial fryers in the nation and has become America's top choice for commercial fryers for restaurants, hospitals, schools, resort casinos and hotels.

The Blower Motor Assembly is the blower motor for fryers. The blower motor provides forced air circulation in your commercial deep fryer.

The Frymaster F13179K blower motor assembly has a 120 volt 3 speed blower motor and top mounted aluminum mounting plate. This blower motor assembly is designed for use with all Frymaster commercial fryers.

The Frymaster F13179-K blower motor assembly is designed to replace the original on/off switch and blower. This blower is about 3/4 horsepower. It will fit into a 120 volt wire. 60 Hz single phase. (Not for use with 220 volt units.)

The Frymaster blender blower motor assembly by itself will not run the Frymaster parts. You must additionally add a 6 pole, 120 volt rotor cage and shaft (p/n 108-1540) to complete the motor assembly replacement.

The frymaster 108-1540 120 volt blower motor assembly, frymaster parts that we carry are supplied by a frymaster certified parts distributor.