BatteryLink Automatic Charge Realy, MFG# 7611, for 12/24V Systems, 120 Amp capacity. Automatically shares single source of charge with Auxiliary Battery. LED indicator, optional LED remote.
The BLUE SEA SYSTEMS BS-7611 Automatic Charge Relay, 12/24V, 120 Amp product is a great camping and RV accessory that keeps your auxiliary battery topped-up by automatically sharing single source of charge with the auxiliary battery. The unit has an LED indicator as well as an optional remote LED to indicate charge status.
The Battery Link Automatic Charge Relay provides the convenience of an automatic charge relay that is completely automatic and will share the load between the primary boat system and a secondary Auxiliary battery. This automatic charge relay allows the primary boat system to keep running without interruptions from changing loads or shut downs during peak periods. The BatteryLink Automatic Charge Realy is fully automatic. It uses a multi-stage, high current diode bridge to isolate a charging source and then connect it safely to both boat batteries in turn automatically.
The BatteryLink Automatic Charge Relay (ACR) is compatible with most automotive and marine batteries. . The ACR is designed to charge both the starting battery and Auxiliary battery from one source (alternator, solar or wind generator) minimizing the risk of over-charging and optimizes battery performance. Designed using highly efficient components, the BatteryLink Automatic Charge Relay (ACR) has a very low power consumption of less than 1/10th amp when in a float state which allows it to be connected to 12 volt marine and RV systems without any detrimental effect. The lighted LED indicator will alert the operator when
If a storm knocks your backup generator out of the box, or some other catastrophic event takes it down, you can rest assured that your primary boat battery will get a boost from the MFG# 7611 automatic charge relay.
The BS-7611 automatic battery charger and relay for 12/24V systems automatically charges the auxiliary battery when the main engine is running, or when shore power is applied. When the engine is off or shore power is disconnected the relay automatically routes charge to the auxiliary battery to eliminate destructive galvanic corrosion. The LED indicator will show that a charge source (engine, alternator, or shore power) is connected in addition to a red LED on the remote indicating when the relay is transferring charge and a green LED on the remote indicating whether the system is charging (LED off) or fully charged (LED on).
With its Automatic Charge Relay, 12/24V Capacity, 120 Amp rating, this switch has been designed to share power between 2 batteries. It also includes a charging ammeter and LED indicator lights which can be installed at the remote position.
When combining two 12 volt or 24 volt batteries in series to create a 48 volt system, it's critical that the batteries stay charged to maintain the voltage of the system. If one battery becomes discharged while the other stays fully-charged, your equalizing and/or overcharge protection on both batteries may be damaged. This automatic charge relay (ACR) from Blue Sea Systems makes it easy to share a single source of charging power between auxiliary and house batteries in a 48V DC load. Just connect the ACR between the charger and auxiliary battery, and watch as the system automatically transfers charge between the two batteries, keeping them
Free Shipping
In stock
