Bradford White 4155131000 Inducer Blower Motor w/Gasket

Inducer Blower Motor w/Gasket

Designed for both gas and oil furnaces. The Inducer Blower Motor w/Gasket is designed to direct a stream of air over the combustion chamber where the flame rises back up to create a secondary burn process which helps ensure complete combustion. This blower is a direct replacement for a worn out or broken inducer motor.

The Bradford White 4155131000 Inducer Blower Motor w/Gasket is a replacement induction motor designed for barbeque grills, heaters, and other appliances.

The Inducer Blower motor is used in tank, tankless and water heater models. It includes a new gasket and pull cord. The motor is designed to control the gas valve to pilot operation and has a thermal protection feature.

Hi-flow inducer blower motor with gasket for Bradford White water heaters

The Inducer Blower Motor is used to circulate the refrigerant between the outdoor condenser and indoor coil of a gas furnace. This can save you up to 40% on your monthly utility bill.

The Inducer Blower has a 4-wire (4W) output, and is compatible with BWCL Series Condensing Units.

Bradford White inducer blower motor used on Kenmore, Rheem, Ruud and other brands of gas furnaces. Also used on some tankless water heaters by Bradford White.

This Blower Motor with Gasket could be the solution if your blower is not blowing what it should. The blower motor can go bad over time causing it to not be able to blow air into the furnace, or it could be that the Gasket that seals the Blower into the Air Handler has broke.

The motor is a major part of a working water heater, and this Blower Motor includes a gasket, ensuring a snug seal. The blower is responsible for circulating the hot gas produced by the burner(s) around your water heater to heat up the water before it's delivered to your home. The thermal overload protector prevents the unit from overheating, which can result in failure.

Gasket included.

COMPRESSOR PART NUMBER 4155131-0001

Performs two vital functions: it draws cooled water from the pump and fan combination through the coils, and circulates air to deliver maximum efficiency.