BELIMO

The Belimo B208B+LRB24-SR-T 1/2"2way0,46cvNSR 24v Modulat is a high performance, low voltage motor controller designed for use with 24 volt systems. It features a 1/2" input and output, and is...

The Belimo B209B+LRB24-SR-T 1/2"2way0.8cv NSR 24v Modul is a high performance, low voltage, two way radio module. It is designed for use with the Belimo B209B+LRB24-SR-T controller. This module...

The Belimo B210B+LRB24-SR-T 1/2"2way1.2cv NSR 24v Modul is a high performance, low noise, 24vdc, 1.2cv, two way radio module. It is designed for use in a wide variety of applications, including...

The Belimo SGVL+LVB24-3 24V NON-S/R ON/OFF/FLTG W/LINK is a 24V non-s/r on/off/fltg switch with link. It is designed for use with the Belimo SGVL+LVB24-3 24V battery charger.

"3/4""NPT 24V NO 3.5CV 30#CLOSE"

The Belimo B323+NRX24-MFT-TN4 3WayVlv SS TRIM 24V NEMA4 is a 3-way, 24VDC, trimable switch with a NEMA4 enclosure. It is designed for use in hazardous (classified) areas. The B323+NRX24-MFT-TN4...

The Belimo B313+TFRB24 is a 3-way switch with a CCV (contact closure voltage) of 0.5" and a 3-way rating of 4.7 Cv. The switch comes with a spg-rtn (spike protection ground) and is designed for use...

The Belimo B315+LRB24-SR is a 3-way 10cv 24v 2/10vdc switch. It is designed for use in a wide variety of industrial and commercial applications.

The Belimo B317B+LF24 is a 3-way switch with a 4.7 Cv nominal switching capacity and a 2-10V operating range. It is designed for use with high-power applications, such as motor control and lighting...

The Belimo B318+TR24-SR is a 3-way 7.4-volt cordless drill/driver with a 2-10-volt range. It has a CCV (compact chuck) for quick and easy bit changes, and a 3-way switch for versatile drilling. The...

The Belimo B320+LRB24-SR is a 24 volt 2-10VDC 45# load bank. It is a 3/4" 24Cv bank with a 2-10VDC output.

The Belimo B310+TR24-3 3 way switch is a CCV switch with a 0.5" male connector and a 3 way connector. It is designed for use with 24V systems.

The Belimo B311+LF24 is a 3 way, 1.9 CV motor with a spring return. It is designed for use with 3D printers and is compatible with most filaments.

The Belimo B311B+LF24 is a 3 way switch with a CCV of 0.5" and a 3 way rating of 1.9 Cv. The switch has a spring return and is rated for 24V.

The Belimo B312+TR24-3 3 way switch is a 0.5" 3 way switch with a CCV. It is designed for use with 24V systems and has an on/off switch.