OTC

This air operated continuous flow grease gun is made with a heavy duty die cast aluminum head that is fitted with automatic air bleeder. It features a larger pumping chamber, honed for rapid...

BRAKE PROPORTIONING VALVE DEPRESSOR ABS

OTC Stinger CV Boot Clamp Cutter is designed to easily cut the CV boot clamp without damaging the boot. It cuts boot clamps up to 10mm wide and.7mm thick. The handles are spring loaded to the open...

The windshield spray nozzle tool is a handy and fast solution for windshield washer nozzles that are simply obstructed or have a poor spray pattern. Two styles of needles are provided for good...

OTC Universal Battery Carrier is used to lift and install most top post and side terminal batteries. It is designed to transfer lifting force to a secure hold on the battery. The teeth on the jaws...

The OTC 939 removes and installs press-fit parts. It can be used with numbers 1126 and 1127 bearing pulling attachments or number 680 pulley pulling attachment (two 8012 adapters are required to...

The OTC 938 gives you the tonnage capacity you need to tackle parts removal and installation on many models of cars, trucks, tractors and more. This can be used with 1124 and 1130 bearing pulling...

The OTC 927 can be used with several attachments, a bearing, or pulley puller attachment. Can be used with OTC 1123 bearing puller attachment, 679 pulley pulling attachment, 1150, 1151, 1152, 1153...

Provides leverage to remove and install stubborn hold-down springs of drum brakes on cars and light trucks. Special beveled cup end and notched design grips the retaining washers (11/16 inch to 7/8...

3 TON SERVICE JACK

The Spectrum Work Light is a rechargeable LED work light with a 30 LED main light source, generating super bright illumination designed to cover a 15 degree sector for lighting in your work area...

WR 3-3/8 OIL FILT STRAP

The OTC 518 pulls harmonic balancers, timing gears and parts having two or three tapped holes. It's a flange type puller. Slotted holes in puller body permit cap screws to be positioned to handle...

The OTC 6796 is a 2-3/4” rounded hex locknut socket designed for use on 3/4-ton and 1-ton Ford F-250 and F-350 trucks with automatic locking hubs. This is not a light hearted socket; it features a...

24" STRICKING PRY BAR